17 June 2019 in IEEE Sensors Journal
A lithium niobate (LN) phase modulator is widely spread because ofhigh electro-optic coefficients. Particularly, it is a highly required component for a closed-loop fiber-optic gyroscope (FOG) of navigation and tactical grade. However, low-frequency distortions of LN phase modulator frequency response can degrade the FOG performance. This paper deals with the research and compensation of frequency response of an LN phase modulator. It is a complex task to measure the response of the LN phase modulator in a FOG because of its Sagnac interferometer. Therefore, the special and novel modulation/demodulation algorithm is proposed. To the best of our knowledge and belief, the proposed method is the first published method that provides the measurement of the pulse response of a phase modulator as a part of a closed-loop FOG. The pulse response obtained in the proposed way allows getting appropriate high order transfer function of a phase modulator. For the first time to the best of our knowledge, the humidity dependence of the LN phase modulator frequency response is found. Influence of the phase modulator frequency response on FOG angular random walk, bias drift, and scale factor nonlinearity and instability is theoretically analyzed and mathematically simulated. The algorithmic method of the phase modulator response compensation is proposed and experimentally confirmed. The experimental results show that the proposed measurement technique of the phase modulator transfer function allows creating the compensating inverse filter that provides phase modulator response being close to flat. The application of the proposed method in the FOG operating mode allows reducing unwanted spikes to the noise level.
1 July 2016 in Gyroscopy and Navigation
30 August 2016 in Journal of Physics: Conference Series
The investigation is devoted to residual amplitude modulation (RAM) of phase electro-optic modulator, which guides are made in LiNbO3 crystal by Ti diffusion technology. An analysis is presented that shows influence of RAM on the signal of fiber-optic gyroscope. The RAM compensation method is offered.
1 August 2020 in IET Optoelectronics
The stability of the central wavelength of the erbium‐doped fibre source (EDFS) is one of the most important parameters to ensure the accurate operation of navigation systems based on high‐accuracy fibre optic gyroscopes (FOGs). In this study, the method of stabilisation of the EDFS as a part of the FOG is presented. The main advantage of this method is the possibility of quick and simple matching of temperature‐compensating spectral filters by changing the pump ratio without modifying the optic scheme. The EDFS optic scheme based on the double‐pass bidirectional pumping configuration. It makes it possible to obtain the world‐class stability of the central wavelength of the EDFS as a component of different devices with the spectral selectivity and set the constant value of the optic power of the output light (OL). Also, this is the first study of the dependence of the temperature coefficient of the central wavelength on the pump ratio. The proposed method allows compensating the spectral characteristics of the FOG, achieving the OL central wavelength stability around 0.7 ppm/°C and the FOG scale factor stability around 0.73 ppm/°C.
1 July 2017 in Gyroscopy and Navigation
Functioning of closed-loop FOG is presented. Block diagram of FOG control system is given, and sources of nonlinear distortions of its components are described. A method to analyze the closed-loop FOG control system is proposed for adjustment of PID controller that does not require complex and high precision test equipment. Control target function is set, and coefficients of PID controller are selected optimal for this target function and certain FOG sample.
23 November 2017 in Journal of Physics: Conference Series
The work offers the method for a study of parasitic refractive index drift (RID) of electro-optical modulator (EOM) based on the lithium niobate (NL) crystal under the action of applied electric voltage. As a result there is proposed a method of compensation EOM's inertial behavior. Described method can be used for improving the accuracy of fiber-optic interferometric sensors and of fiber-optic gyroscope in particular.