28 February 2020 in Physical Review Applied
Wave scattering from a cylinder with a tensor impedance surface is investigated on the basis of the Lorentz-Mie theory. A practical example of such a cylinder is a subwavelength metallic rod with helical dielectric-filled corrugations. The investigation is performed with the aim to maximize the scattering cross section by tailoring the surface impedance of cylindrical scatterers. For normally incident and waves, the required surface impedance of a subwavelength cylinder can be produced by longitudinal (axial) and transverse (circumferential) corrugations, respectively. It is shown that such corrugations induce superscattering at multiple frequencies, which can be widely tuned with either the size or the permittivity of dielectric-filled corrugations or both. In the microwave band, this effect is demonstrated to be robust to material losses and is validated against full-wave simulations and experimental results. For waves the enhanced scattering from the cylinder is found to have a broad frequency bandwidth, provided that the relative permittivity of corrugations is low or equal to unity. In the latter case, the corrugated cylinder acts as an all-metal superscatterer. For such cylinders, near-field measurements are performed and provide experimental evidence of the superscattering phenomenon for all-metal objects. In addition to multifrequency superscattering, the dielectric-filled corrugations are shown to provide multifrequency cloaking of the cylinder for incident waves. Simultaneous superscattering and cloaking at multiple frequencies distinguishe corrugated cylinders from other known practicable scatterers for potential applications in antenna designing, sensing, and energy harvesting.
19 June 2006 in IEEE Transactions on Plasma Science
A simple approximate theory of background plasma influence on the electromagnetic properties of high-power gyrotron cavities is presented. It is shown that a background plasma slightly reduces the operational frequency of gyrotrons, increases the quality factors of operational and neighbouring modes, and modifies the longitudinal field distribution in the gyrotron cavity. The calculated downshift of the operational frequency is compared with long-pulse measurements performed in 140-GHz 1-MW continuous wave gyrotron experiments at Forschungszentrum Karlsruhe
30 April 2017 in Journal of Infrared, Millimeter, and Terahertz Waves
7 December 2018 in IEEE Transactions on Microwave Theory and Techniques
The coupled transcendental equations describing cutoff frequencies of TE and TM modes are deduced for a rectangular waveguide with arbitrary wall impedance. In the case of TE modes, their generalization is made to a rectangular guiding structure, which possesses both distributed wall impedance and inhomogeneous dielectric loading. Effective impedance is obtained for imperfectly conducting surface incorporating periodic rectangular corrugations along the direction of mode propagation. Circular waveguide bounded by such corrugated surface and rectangular impedance waveguide are considered as numerical examples. For these waveguides, the computations performed to determine the cutoff frequencies of TE guiding modes are validated against the results of the perturbation theory and the finite-element method.
1 July 2005 in Plasma Physics Reports
A study is made of the dispersion properties of waveguides filled with a magnetized plasma. It is shown that the eigenmodes of the waveguides filled with a low-density magnetized plasma fall into two...
14 November 2017 in IEEE Transactions on Electron Devices
Cavity modification is proposed with the aim of enhancing the continuous frequency tunability of a gyrotron. The modification can be applied to both uniform and tapered gyrotron cavities and involves just using an additional cavity section. It ensures larger effective cavity length and thus lower starting current for higher order axial modes. As a consequence, the frequency tuning band of the gyrotron can be increased significantly. Moreover, the proposed cavity modification is beneficial for smoothing the variations of output power within the tuning band.