10 January 2024 in RSC Advances
Lithium–sulfur (Li–S) batteries are considered promising next-generation energy storage devices due to their low cost and high energy density (2600 W h kg−1). However, the practical applicability of Li–S batteries is hindered by the insulating nature of sulfur cathodes, and the high solubility of polysulfides (Li2Sx, 3 < x ≤ 8) which are formed during the electrochemical process. Integrating sulfur into the carbon host is an effective way to enhance the conductivity of the electrode which hampers the shuttling effect of the polysulfides. Here in this study, hierarchical porous carbon structures (HPC) are prepared from spent coffee waste (SCW) by the KOH activation process and are encapsulated with sulfur (SHPC) which increases the interaction between sulfur and carbon and enhances both the electronic and ionic conductivities. Further wrapping of SHPC with N-doped multi-walled carbon nanotubes (NCNTs) gives a SHPC-NCNT composite, which alleviates the shuttling of polysulfides by trapping them and ensures the required conductivity to the sulfur cathode during the Li+ reactions. When studied as a cathode material for Li–S batteries, the prepared cathode showed 664 and 532 mA h g−1 specific capacities after 150 cycles at 0.2C and 0.5C, respectively. The stable cyclability and rate capability properties of SPHCNCNT suggest that the prepared sulfur composite is suitable as a cathode material for Li+ energy storage applications.
19 July 2023 in RSC Advances
This work has developed a straightforward approach to obtaining NiO hollow structures by using Li2O2 as an easily removable template. The easy availability and electrochemically active nature of NiO have attracted researchers' attention as an anode electrode for Li-ion storage applications, including Li-ion secondary batteries (LIBs) and for Li-ion hybrid supercapacitors (LiHSCs; which offer higher power densities than LIBs without compromising energy density). However, NiO usage has been limited to its low reaction reversibility, poor conductivity, and conversion reaction capability. Recently, hollow nanostructured materials have attracted attention as efficient battery materials due to their fascinating structural features. This study presents a modified Li2O2-assisted method to obtain porous open 3D architectures of NiO nanostructures. The resultant hollow structures are electrochemically studied as an anode for a LIB, exhibiting excellent stability over hundreds of cycles. The result is recognized as one of the finest among NiO anodes reported. Also, NiO hollow structures studied as anodes for LiHSC devices fabricated with activated carbon cathodes exhibit an outstanding comprehensive electrochemical performance which is better than the typical LIB and supercapacitors.
14 May 2024 in Nanoscale Advances
Ni–MnO2 hollow structures were synthesized and used as anodes for LICs, where they exhibited higher energy and power than the LIBs and SCs.
23 January 2025 in RSC Advances
The novel hollow porous structures of Ni-doped MnO2 encapsulated with multi-walled carbon nanotubes (CNTs) used as an efficient host for a sulfur cathode, which showed excellent electrochemical properties with faster Li+ diffusion properties.
18 June 2023 in ChemElectroChem
Silicon (Si) is considered an alternative anode material for Li‐S batteries considering its high theoretical capacity of 3590 mAh g−1 at room temperature, and advantageous to avoid unfavorable Li metal anode, which forms dendrites during the cell charging and discharging process causes short circuits. Here in this study, we have prepared a nanocomposite anode comprising Si nanoparticles, multi‐walled carbon nanotubes (MCNTs), and graphite (G) by low‐temperature annealing approach and studied their electrochemical characteristics by combining with sulfur cathodes into Si‐S full cells in ether‐based liquid electrolytes. The prepared Si‐S battery system exhibits stable electrochemical properties with long cycle life. The fabricated full cell delivered specific capacities of 328 mAh g−1 at 0.1 C, and 243 mAh g−1 at 0.5 C, with calculated energy densities of 542 and 473 Wh kg−1, respectively, without any cell failure. These results indicate that the integration of Si, MCNTs, and G is a promising approach to avoiding Li‐metal anodes and achieving high and stable capacities for Li‐S batteries.
1 July 2013 in Journal of Experimental Nanoscience
The nickel hydroxide nanopowders mixed with SnO2 nanoparticles as an additive in different proportions were prepared and characterised by X-ray diffraction (XRD), transmission electron microscope (TEM) and electrochemical measurement by cyclic voltammetry. XRD examination suggests that the composite Ni(OH)2/SnO2 has both the phases of α-Ni(OH)2 and β-Ni(OH)2 with SnO2 nanoparticles. TEM images show the nanostructures of nickel hydroxide, SnO2 and dispersion of SnO2 nanoparticles on nickel hydroxide particles in the composite. The electrochemical studies revealed that the composite electrode has better redox reversibility and specific capacitance values compared to the pure Ni(OH)2, α-Ni(OH)2 and usual β-Ni(OH)2 electrodes and it can be applied as a promising positive active material for alkaline rechargeable batteries.