8 January 2013 in Meccanica
The paper presents a mechanical model of the mixed-mode bending (MMB) test used to assess the mixed-mode interlaminar fracture toughness of composite laminates. The laminated specimen is considered as an assemblage of two sublaminates partly connected by an elastic–brittle interface. The problem is formulated through a set of 36 differential equations, accompanied by suitable boundary conditions. Solution of the problem is achieved by separately considering the two subproblems related to the symmetric and antisymmetric parts of the loads, which for symmetric specimens correspond to fracture modes I and II, respectively. Explicit expressions are determined for the interfacial stresses, internal forces, and displacements.
4 January 2013 in Meccanica
The paper presents an enhanced beam-theory (EBT) model of the mixed-mode bending (MMB) test, whereby the specimen is considered as an assemblage of two sublaminates partly connected by an elastic–brittle interface. Analytical expressions for the compliance, energy release rate, and mode mixity are deduced. A compliance calibration strategy enabling numerical or experimental evaluation of the interface elastic constants is also presented. Furthermore, analytical expressions for the crack length correction parameters—analogous to those given by the corrected beam-theory (CBT) model for unidirectional laminated specimens—are furnished for multidirectional laminated specimens, as well. Lastly, an example application to experimental data reduction is presented.
1 January 2016 in Procedia Structural Integrity
We have developed a mechanical model of the mixed-mode bending (MMB) test, whereby the specimen is considered as an assemblage of two identical sublaminates, modelled as Timoshenko beams. The sublaminates are partly connected by a linearly elastic–brittle interface, transmitting stresses along both the normal and tangential directions with respect to the interface plane. The model is described by a set of suitable differential equations and boundary conditions. Based on the explicit solution of this problem and following an approach already adopted to model buckling-driven delamination growth in fatigue, we analyse the response of the MMB test specimen under cyclic loads. Exploiting the available analytical solution, we apply a fracture mode-dependent fatigue growth law. As a result, the number of cycles needed for a delamination to extend to a given length can be predicted
9 February 2023 in Journal of Technology and Exploitation in Mechanical Engineering
Laboratory specimens used to assess the interfacial fracture toughness of layered materials can be classified as either conventional or unconventional. We call conventional a specimen cut from a unidirectional composite laminate or an adhesive joint between two identical adherents. Assessing fracture toughness using conventional specimens is a common practice guided by international test standards. In contrast, we term unconventional a specimen resulting from, for instance, bimaterial joints, fiber metal laminates, or laminates with an elastically coupled behavior or residual stresses. This paper deals with unconventional specimens and highlights the key issues in determining their interfacial fracture toughness(es) based on fracture tests. Firstly, the mode decoupling and mode partitioning approaches are briefly discussed as tools to extract the pure-mode fracture toughnesses of an unconventional specimen that experiences mixed-mode fracture during testing. Next, we elaborate on the effects of bending-extension coupling and residual thermal stresses often appearing in unconventional specimens by reviewing major mechanical models that consider those effects. Lastly, the paper reviews two of our previous analytical models that surpass the state-of-the-art in that they consider the effects of bending-extension coupling and residual thermal stresses while they also offer mode partitioning.
17 January 2013 in Meccanica