23 October 2023 in IEEE Transactions on Nanotechnology
The importance of testing for ammonia is underlined by the fact that its adverse effects on the environment, ecosystems and human health are widely acknowledged. However, detecting low concentrations of ammonia at lower temperatures poses a significant challenge. In this study, a two-dimensional tin sulfide (SnS 2 ) combined with graphene was synthesized using a straightforward one-step hydrothermal method, followed by comprehensive characterization and analysis of the material. The SnS 2 /rGO (reduced graphene oxide) sensors exhibited the best performance at room temperature (25℃). The composite material effectively reduced the operating temperature and resistance value of the sensor. Notably, the sensor achieved a minimum detectable concentration of 8 ppb of ammonia. The response of the sensor displayed a favorable linear relationship within the concentration range of 25 ppm to 125 ppm for ammonia. This behavior was accompanied by excellent repeatability. In addition, the gas-sensing mechanism of the ammonia sensor is thoroughly analysed. This study contributes to the progress of ammonia detection technology, a vital aspect of environmental monitoring and safeguarding human well-being.
29 May 2024 in IEEE Transactions on Instrumentation and Measurement
This paper introduces a groundbreaking optical fiber sensor designed for the efficient detection of butanone gas. Leveraging Copper Hydroxyl Fluoride (CuOHF) as a highly sensitive material, the sensor exploits evanescent wave absorption and interference effects within the optical fiber. Experimental outcomes reveal the exceptional performance of the CuOHF fiber optic sensor. Pioneering the use of hydroxyfluoride in fiber optic sensor, especially for butanone gas detection, the CuOHF sensor boasts a high sensitivity of 0.0018 dB/ppm, reliably detecting concentrations as low as 1 ppm. The sensor exhibits rapid response and recovery times, coupled with good selectivity. The abundance of hydroxyl groups on the CuOHF surface enhances interactions with butanone gas molecules. The low electron affinity of fluorine augments surface adsorption stability, while interfacial effects facilitate efficient optical signal transmission. The high reactivity of the sensor ensures efficient and rapid adsorption and desorption of butanone gas molecules. The study underscores the novelty and potential of CuOHF fiber optic sensors in butanone gas detection, providing a dependable solution for precise monitoring. The success of this research holds significance for advancing a broader spectrum of applications in fiber optic sensing and gas detection within the realm of optics.
12 January 2026 in IEEE Transactions on Instrumentation and Measurement
Current semiconductor gas sensors face inherent limitations from high operational temperatures, constraining practical deployment. To address this, we developed a room-temperature triethylamine (TEA) gas sensor based on flower-like SnS2-PANI heterostructures. Comparative assessment of five sensor variants—pristine PANI, SnS2, and 10%/20%/30% SnS2-PANI composites—revealed that the 20% SnS2-PANI sensor exhibited commendable selectivity and sensitivity to TEA gas at ambient temperature. Specifically, this sensor achieved a response rate of 75.4% for 100 ppm TEA gas. The concentration gradient fitting curve demonstrated strong linearity, indicating its suitability for quantitative TEA measurement across varying concentrations. The three-dimensional flower-like morphology enhances the specific surface area accessible for gas molecule interactions, thereby providing a greater availability of active sites. Additionally, the p-n heterojunction involving PANI and SnS2 facilitates the adsorption and reaction processes of TEA gas while also promoting protonation and deprotonation dynamics of both the gas molecules and PANI. This research highlights the potential of flower-like SnS2-PANI sensors for room-temperature TEA detection and demonstrates their viability for real-time environmental TEA measurement in industrial emission scenarios.