A laser ultrasonic method is proposed for the nondestructive evaluation (NDE) of structural adhesive bonding. Zero-group-velocity (ZGV) resonances were generated and detected in five trilayer assemblies composed of two asymmetric aluminum alloy plates bonded with an epoxy adhesive. Cohesive and adhesive defects were introduced to degrade the practical adhesion. The attenuation of the temporal signal of ZGV resonances was found to provide sufficient information to discriminate between strong and weak bonding. Two metrics characterizing the attenuation were identified, which allow us to quantitatively evaluate the differences between the manufactured samples. A 2D scan of a trilayer assembly with different bond defects demonstrates the imaging capability of this all-optical NDE method.
This work aims at demonstrating the ability of an acoustic linear code to model the propagation of a shock wave created by a laser impact over a metallic surface. In this process, a high pressure surface level is reached using a ns laser pulse that heats the surface of the material and generates a dense plasma expansion. The pressure reaches few GPa so shock waves are generated and propagate into the bulk of the material. Currently, shock wave propagation is modeled using continuity equations and an ad hoc equation of state for the illuminated material, very limiting because it is numerically intensive. Here, we propose to model the shock wave bulk propagation using a linear acoustic code. A nonlinear surface pressure term, resulting from the laser–matter interaction, is used as a boundary condition. The applied numerical scheme is based on the Virieux scheme, including a fourth order finite difference discretization of the linearized elastomechanical equations. The role of longitudinal and transverse waves and their origins are highlighted. The importance of considering 3D geometries is pointed out. Simulations are finally confronted with experimental results obtained with the Hephaistos Laserlab facility (energy up to 14 J at 532 nm wavelength laser; pulse duration: 7 ns). Illuminations up to the optical breakdown in water are easily achieved with laser focal spots of 5 mm width. Excellent agreement between experiments and simulations is observed for several sets of experimental parameters for titanium, a material of high elastic limit, while limitations are founded for aluminum. The code is available in the MetaData.
Intense acoustic shock waves were applied to evaluate the mechanical strength of structural epoxy bonds between a TA6V4 titanium alloy and a 3D woven carbon/epoxy composite material. Two bond types with different mechanical strengths were obtained from two different adhesive reticulations, at 50% and 90% of conversion, resulting in longitudinal static strengths of 10 and 39 MPa and transverse strengths of 15 and 35 MPa, respectively. The GPa shock waves were generated using ns-scale intense laser pulses and reaction principles to a confined plasma expansion. Simulations taking into account the laser–matter interaction, plasma relaxation, and non-linear shock wave propagation were conducted to aid interpretation of the experiments. Good correlations were obtained between the experiments and the simulation and between different measurement methods of the mechanical strength (normalized tests vs laser-generated shock waves). Such results open the door toward certification of structural bonding.
A laser ultrasonic method is proposed for the nondestructive evaluation of bonded assemblies based on the analysis of elastic plane waves reflected from the bonding interface. Plane waves are numerically synthesized from experimentally detected cylindrical waves. Several angles of incidence with respect to the bonding interface are achieved by varying the delay in the synthesis step. An inverse problem using these plane waves is then solved to identify the normal and transverse interfacial stiffnesses that model the mechanical coupling between two bonded media. The semi-analytic model developed and detailed in Hodé et al. [J. Acoust. Soc. Am. 150, 2065 (2021)] is used to create the database that contains simulated laser-generated ultrasounds required to solve the inverse problem. The developed method is first validated with semi-analytic simulated input data where Gaussian noise has been added. Next, the method is applied using signals acquired on an aluminum alloy plate and on assemblies (with and without adhesion defects) made of two aluminum alloy plates bonded by an aeronautical structural epoxy adhesive film. Differences between the identified values of interfacial stiffnesses distinguish the three samples and obtain quantitative values to characterize the adhesive bonding.