Schlieren and shadowgraph photography has been widely used to offer insight into the flow field in aerospace engineering due to their ease of application. The high-speed schlieren and shadowgraph techniques are typically applied to investigation of unsteady shock wave structure including shock reflection patterns and shock wave/boundary layer interactions, etc. Generally, qualitative analysis is performed based on the schlieren and shadowgraph image sequences. To process and analyze the large data set of the high-speed schlieren and shadowgraph images quantitatively, especially for the shock wave detection and tracking, a software was developed based on MATLAB GUI and its image processing toolbox. In this study, the image processing techniques exploited in the software, such as background subtraction, filter, threshold, edge detection, and shock tracking are presented. A case study on the phenomena of shock wave reflection from a solid surface was conducted. The results show that the proper filter method and the background image subtraction can effectively eliminate the image noises in frequency domain, which makes it easier to analyze the flow structure. Moreover, the instantaneous locations of shock waves are detected accurately, and the shock wave propagation speed calculated using the developed software are consistent with those of previous studies.
The canting axis of thrusters on space platforms, which likely operate in a vacuum environment with a high degree of flow rarefaction, is significant in order to create the desired torque for maneu...
A shock–shock interaction problem can arise in high-speed vehicles where an oblique shock from one part of the body impinges on a bow shock from a different part of the body. The nature of the interaction can change as the vehicle increases in altitude to a more rarefied environment. In this work, the outcomes of a numerical study investigating the formation of Edney shock patterns from type-I to type-VI as a result of shock–shock interactions at different rarefaction levels are presented. The computations are conducted with a direct simulation Monte Carlo solver for a free-stream flow at a Mach number of 10. In shock–shock interaction problems, both geometrical and rarefaction parameters determine what type of Edney pattern is formed. The region on the shock impinged surface that experiences enhanced thermo-mechanical loads increases when the free-stream flow becomes more rarefied, but the peak values decrease. It is known that these shock interactions can have unsteady behavior in the continuum regime; the current work shows that although increasing rarefaction tends to move the flow toward steady behavior, under some conditions the flow remains unsteady.Graphical