1 September 2021 in International Journal of Multiphase Flow
25 October 2001 in Journal of Synchrotron Radiation
The possibility of concentrating a synchrotron X-ray beam using diffraction by a single crystal with a properly designed transverse groove on its surface, suggested earlier, has been studied experimentally. Here, the first experimental demonstration of this effect is reported, performed on beamline BM5 at the ESRF. The experimental result confirms the theoretical model.
16 February 2022 in Journal of Applied Crystallography
9 October 2023 in EPJ Web of Conferences
The excellent performance of highly oriented pyrolytic graphite (HOPG) as monochromator, analyzer and filter material for neutron instrumentation was discovered more than 50 years ago. Even though HOPG has been in use for a long time, there is still room for improvements regarding its optimized use in neutron beam conditioning. The features of a novel concept called POSI based on careful x-ray characterization of the HOPG crystals and on proven mounting and focusing technologies show that the efficiency of HOPG monochromators can be increased while decreasing complexity and cost. Moreover, by combining HOPG and bent perfect silicon crystals the functionality of separate single monochromators and analyzers can be expanded to a wider range of applications provided by dual systems or bichromators.
1 January 1992 in Review of Scientific Instruments
In parallel to the design and construction of new synchrotron radiation sources quite important efforts are required to upgrade existing and develop new x‐ray optics that is capable of conditioning powerful x‐ray beams with minimum losses of brilliance. In the context of these research and development activities a well equipped laboratory is absolutely vital. Such a laboratory must have capabilities to prepare, mount, transfer, align and test optical elements with the high precision that is typical for European Synchrotron Radiation Facility (ESRF) beamline instrumentation, for example, microroughness and slope error of mirrors down to 0.1 nm root mean square and μrad, respectively, and μm and μrad spatial and angular positioning. At ESRF the following facilities presently exist or are being installed: (i) a laboratory for single crystal orientation, cutting, grinding, polishing, and mounting, (ii) three interferometers for optical metrology of surfaces such as figure and finish, all in clean room and thermally stable environment, (iii) a three axis diffractometer for precise x‐ray metrology of all kinds of optical elements up to 1‐m long, also in clean room and stable environment, (iv) a multilayer fabrication facility featuring sputtering and plasma chemical vapor deposition with in situ x‐ray diffraction and ellipsometry controls.