A double-diode-isolation method with low parasitic capacitance devices and reverse clamping is proposed to accurately extract the high-frequency and high-voltage dynamic on-resistance ( $R_{\mathrm{ dson}}$ ) of AlGaN/GaN high electron mobility transistor (HEMT) power devices. The response time required for the drain voltage to drop back to the on-voltage of this testing circuit can reach 100 ns, and the forward voltage drop of the isolation diode is monitored in real time using low-voltage probes. A low value constant current source is built to power the testing circuit at only several mA to avoid additional self-heating effect. With these improvements, we can obtain a test frequency of more than 1 MHz, a test voltage of more than 600 V and an accuracy of higher than 97.8% for the extraction of dynamic $\text{R}_{\mathrm{ dson}}$ .
We have fabricated the InGaN/AlGaInN multiple quantum wells with lattice-matched AlGaN/InGaN superlattices barriers (SL-MQWs). The lattice-matched superlattices promote the formation of the high-quality MQWs and eliminate the large polarization electric field. Highly excited photoluminescence measurement is performed by Ti-sapphire pulse laser with the maximal carrier density of 10 20 cm -3 . Under such high carrier density, the conventional InGaN/GaN MQWs (C-MQWs) have an additional nonradiative loss of carriers and suffer from the efficiency droop effect, while slight droop behavior is observed in the SL-MQWs sample. The results show that the substitution of AlGaN/InGaN superlattices as quantum barriers can effectively suppress the droop behavior at highly excited condition.
A new approach to fabricating high-quality AlInGaN film as a lattice-matched barrier layer in multiple quantum wells (MQWs) is presented. The high-quality AlInGaN film is realized by growing the AlGaN/InGaN short period superlattices through metalorganic chemical vapor deposition, and then being used as a barrier in the MQWs. The crystalline quality of the MQWs with the lattice-matched AlInGaN barrier and that of the conventional InGaN/GaN MQWs are characterized by x-ray diffraction and scanning electron microscopy. The photoluminescence (PL) properties of the InGaN/AlInGaN MQWs are investigated by varying the excitation power density and temperature through comparing with those of the InGaN/GaN MQWs. The integral PL intensity of InGaN/AlInGaN MQWs is over 3 times higher than that of InGaN/GaN MQWs at room temperature under the highest excitation power. Temperature-dependent PL further demonstrates that the internal quantum efficiency of InGaN/AlInGaN MQWs (76.1%) is much higher than that of InGaN/GaN MQWs (21%). The improved luminescence performance of InGaN/AlInGaN MQWs can be attributed to the distinct reduction of the barrier-well lattice mismatch and the strain-induced non-radiative recombination centers.