18 November 2024 in International Journal of Heat and Mass Transfer
31 May 2023 in International Journal of Heat and Mass Transfer
1 January 2021 in APL Photonics
We demonstrate a synthetic Hall effect for light, using an acousto-optically modulated nanophotonic resonator chain. To produce this effect, we simultaneously generate the required synthetic electric field using temporal modulation and the required synthetic magnetic field using spatial modulation of the resonator chain. We show how the combination of these synthetic fields transverse to the direction of light propagation can be used to produce non-reciprocal optical transmission, as a basis for new photonic and topological devices.
5 August 2024 in Applied Physics Letters
Phase change materials (PCMs) present opportunities for efficient thermal management due to their high latent heat of melting. However, a fundamental challenge for PCM cooling is the presence of a growing liquid layer of relatively low thermal conductivity melted PCM that limits heat transfer. Dynamic phase change material (dynPCM) uses an applied pressure to pump away the melt layer and achieve a thin liquid layer, ensuring high heat transfer for extended periods. This paper investigates heat transfer during dynPCM cooling when the heated surface has extended features made from high thermal conductivity copper (Cu). Using experiments and finite element simulations, we investigate the heat transfer performance of dynPCM paraffin wax on finned Cu surfaces. A total of 102 transient temperature measurements characterize the performance of dynPCM with extended surfaces and compare the performance with other cooling methods including hybrid PCM and air cooling. The study examines the effects of fin geometry, applied power (20–65 W), and pressure (0.97–12.5 kPa). For dynPCM on a finned surface and a heating power of 65 W, the thermal conductance is 0.45 W/cm2-K, compared to 0.22 W/cm2-K for dynPCM on a flat surface and 0.10 W/cm2-K for hybrid PCM. The heat transfer is highest at the fin tips where the melt layer is thinnest, providing valuable design guidelines for future high performance dynPCM cooling technologies.
18 March 2024 in Applied Physics Letters
To accommodate societal electrification and decarbonization, renewable energy resources continue to expand their share of the global energy market. The intermittency of renewable energy technologies as well as the high power density of modern electrified platforms necessitates the need for both efficient thermal management and high-density thermal storage. Phase change materials are a promising passive thermal energy storage solution. However, difficulties with efficient system implementation stemming from the inherent melt pool formation hinder their potential. We develop an innovative strategy, termed dynamic phase change material “dynPCM,” to address this thermal transport issue by ensuring a constant, thin, melt layer. We analyze the fundamental limits of dynPCMs, characterize the peak achievable heat flux and energy/power densities, estimate the power consumption of dynPCM systems, and investigate the fundamental physics which govern dynPCM behavior. We show that dynPCM can eliminate the classical trade-off seen between energy density and power density and achieve ultrahigh heat fluxes, ∼105 W/cm2, with heat flux-to-required power ratios as high as ∼107. We also demonstrate achievable power densities as high as ∼100 W/cm3 at energy densities as high as ∼10 kJ/cm3. Throughout this work, we develop a methodology to evaluate the operating limits, enabling adaptation of the dynPCM system concept to a variety of applications and industries.
16 April 2025 in International Journal of Heat and Mass Transfer