9 January 2023 in Applied Physics Letters
We demonstrate a monolithic all-epitaxial resonant-cavity architecture for long-wave infrared photodetectors with substrate-side illumination. An nBn detector with an ultra-thin (t≈350 nm) absorber layer is integrated into a leaky resonant cavity, formed using semi-transparent highly doped (n++) epitaxial layers, and aligned to the anti-node of the cavity's standing wave. The devices are characterized electrically and optically and demonstrate an external quantum efficiency of ∼25% at T=180 K in an architecture compatible with focal plane array configurations.
21 October 2024 in Applied Physics Letters
We demonstrate room temperature operation of mid-wave infrared photodetectors leveraging a guided mode resonance architecture and bulk alloy InAsSb absorbers. Room temperature operation with low dark current is achieved by using detector structures with ultra-thin (150, 250 nm) absorbers leveraging the strong confinement enabled by the guided mode architecture. Devices with 1D and 2D grating arrays are fabricated and characterized, and compared to unpatterned detector devices. We see enhancement in the detectors’ optical response associated with coupling to both TE- and TM-polarized guided modes and good agreement between experimental and theoretically-predicted behavior. We show strong enhancement for unpolarized light incident on 2D grating arrays, with a broader spectral response than observed for polarized light incident upon 1D grating GMR detectors. The bulk InAsSb detectors presented in this work offer enhanced performance at room temperature for a range of imaging and sensing applications.
15 October 2025 in Journal of Applied Physics
Mid-wave infrared photodetectors with ultra-thin (t<250nm) absorbers are characterized electrically and optically for a range of absorber doping concentrations. Negative differential resistance is observed in unintentionally doped absorber samples and is attributed to depletion of the ultra-thin absorber. A significant reduction in room temperature dark current of about 30% is observed in devices with compensation-doped absorbers when compared to those with unintentionally doped absorbers. A qualitative model of voltage-, temperature-, and doping-dependent dark current is developed and used to explain the diffusion-limited dark current of depleted-absorber detectors at high operating temperatures. The results presented offer insight into the electrical and optical behavior of ultra-thin mid-wave infrared detectors and potential approaches for further reduction in dark current.
26 December 2022 in Applied Physics Letters
We demonstrate a room-temperature all-epitaxial guided-mode resonance light-emitting diode operating in the mid-wave infrared. The device comprises a dielectric waveguide with an AlGaAsSb p−i−n diode core, below a layer of grating-patterned GaSb and above a highly doped, and thus, low index, InAsSb layer. Light emitted from the device active region into propagating modes in the waveguide scatters into free space via the GaSb grating, giving rise to spectrally narrow features that shift with emission angle across much of the mid-wave infrared. For collection angles approaching 0°, we are able to obtain linewidths of ∼2.4 meV across the spectral/angular emission of the LED, corresponding to λ/Δλ∼570. Fine control of emission wavelength can be achieved by tuning the applied current, which causes a redshift of approximately 20 nm due to the thermo-optic effect. The presented device has the potential for use in compact, high bandwidth, and low-cost mid-wave infrared sensing applications requiring spectral discrimination.
23 March 2026 in Optical Materials Express
The infrared optical response of noble metals is traditionally considered perfect electrical conductor (PEC)-like due to the noble metals’ exceptionally large electron concentrations, and thus large (and negative) real permittivity. While PEC-like behavior is ideal for a broad range of applications, for instance mirrors, gratings, and wavelength- (and macro-) scale resonators and antennas, the utility of noble metals for nanoscale (sub-diffraction-limit) physics at long wavelengths is limited. However, in ultra-low volume (dilute) metal films, such as those with nanometer-scale thicknesses or lithographic dilution (subwavelength perforation), the thin films’ sheet conductivity is massively reduced, enabling light to penetrate and interact with the films much more efficiently. This avails the infrared of a host of opportunities for noble-metal-based plasmonics, with the potential for nanoscale (deep subwavelength) confinement and strong light-matter interaction, otherwise prohibited with noble metals in this wavelength range. In this perspective, we review the recent advances in dilute metal films for near- and mid-infrared photonics and plasmonics, and discuss the advantageous properties of these optical thin films for potential applications in sensors, detectors, sources, and nonlinear and quantum optics.
3 November 2025 in Applied Physics Letters
We propose and demonstrate an optical structure described as a guided mode slot resonator, which provides the strong resonant response of high contrast gratings, while at the same time concentrating the resonant field in nano-scale air voids. The resonant structures are fabricated from silicon-on-sapphire wafers and optically characterized by angle- and polarization-dependent infrared reflection and transmission spectroscopy. Experimental results show agreement with simulations, suggesting strong field enhancement of long wavelength light in nano-volume voids.