Useful materials must satisfy multiple objectives, where the optimization of one objective is often at the expense of another. The Pareto front reports the optimal trade-offs between these conflicting objectives. Here we use a self-driving laboratory, Ada, to define the Pareto front of conductivities and processing temperatures for palladium films formed by combustion synthesis. Ada discovers new synthesis conditions that yield metallic films at lower processing temperatures (below 200 °C) relative to the prior art for this technique (250 °C). This temperature difference makes possible the coating of different commodity plastic materials (e.g., Nafion, polyethersulfone). These combustion synthesis conditions enable us to to spray coat uniform palladium films with moderate conductivity (1.1 × 105 S m−1) at 191 °C. Spray coating at 226 °C yields films with conductivities (2.0 × 106 S m−1) comparable to those of sputtered films (2.0 to 5.8 × 106 S m−1). This work shows how a self-driving laboratoy can discover materials that provide optimal trade-offs between conflicting objectives.
11 November 2019 in Energy & Environmental Science
Organic molecular hole-transport materials (HTMs) are appealing for the scalable manufacture of perovskite solar cells (PSCs) because they are easier to reproducibly prepare in high purity than polymeric and inorganic HTMs. There is also a need to construct PSCs without dopants and additives to avoid formidable engineering and stability issues. We report here a power conversion efficiency (PCE) of 20.6% with a molecular HTM in an inverted (p–i–n) PSC without any dopants or interlayers. This new benchmark was made possible by the discovery that, upon annealing, a spiro-based dopant-free HTM (denoted DFH) containing redox-active triphenyl amine (TPA) units undergoes preferential molecular organization normal to the substrate. This structural order, governed by the strong intermolecular interactions of the DFH dioxane groups, affords high intrinsic hole mobility (1 × 10−3 cm2 V−1 s−1). Annealing films of DFH also enables the growth of large perovskite grains (up to 2 μm) that minimize charge recombination in the PSC. DFH can also be isolated at a fraction of the cost of any other organic HTM.
2 November 2022 in ACS Applied Materials & Interfaces