In order to extend the operation regime of existing gas turbine combustion systems to lower the minimum loads, the applicability of matrix burners (arrays of jet flames) as an alternative to conventional swirl stabilized burners has been considered. In comparison to well-studied single jet flame systems, the effects of geometry and thermodynamic parameters on characteristics of matrix burner systems have not been studied in detail. Information, which is essential for design processes e.g. scaling of matrix burners, is not yet available in public domain. This work involves a systematic investigation of a matrix burner system operating at highly turbulent flow conditions (Reynolds Number ≈ 20000) prevailing in gas turbine combustion systems. In order to understand the effects of geometrical scaling, three variants of jet diameter have been investigated. A detailed test campaign including lean blow out limits detection, velocity field measurement and hydroxyl radical (OH*) chemiluminescence recording has been conducted. Influence of variation in stoichiometry and exit velocity of fuel-air mixture has been captured. The results show that it is possible to generalize the scaling of the matrix burner using the well-known Peclet criterion.
Turbulent swirl flames using fuel sprays are found in many combustion systems. Since sprays with different characteristics can be produced, pulsed spray injection allows the realization of different flame types using the same burner. Two different flame types have been studied experimentally and numerically: a burner-attached and a lifted flame. Large eddy simulations using Lagrangian particles to represent the spray, and a combined presumed PDF and tabulated chemistry approach to model the turbulent combustion are able to represent the different flame types. A simple-to-implement improvement of the numerical algorithm for the droplets is proposed, consisting of the redistribution of the droplet source terms between all neighbor cells of the gas phase. This improvement stabilizes the numerical method and allows the use of large time steps. The numerical results have been used to investigate the phenomena leading to the different flame geometries. They show that the burner-attached flame is caused by a destructive interaction between the spray droplets and the central recirculation zone (CRZ). In the case of the lifted flame, the CRZ is preserved.
5 October 2025 in Proceedings of the Combustion Institute