19 June 2023 in Nature Communications
Stable lithium metal negative electrodes are desirable to produce high-energy batteries. However, when practical testing conditions are applied, lithium metal is unstable during battery cycling. Here, we propose poly(2-hydroxyethyl acrylate-co-sodium benzenesulfonate) (PHS) as negative electrode protective layer. The PHS contains soft poly (2-hydroxyethyl acrylate) and poly(sodium p-styrene sulfonate), which improve electrode flexibility, connection with the Cu current collector and transport of Li ions. Transmission electron cryomicroscopy measurements reveal that PHS induces the formation of a solid electrolyte interphase with a fluorinated rigid and crystalline internal structure. Furthermore, theoretical calculations suggest that the -SO3- group of poly(sodium p-styrene sulfonate) promotes Li-ion motion towards interchain migration through cation-dipole interaction, thus, enabling uniform Li-ion diffusion. Electrochemical measurements of Li | |PHS-coated-Cu coin cells demonstrate an average Coulombic efficiency of 99.46% at 1 mA/cm2, 6 mAh/cm2 and 25 °C. Moreover, when the PHS-coated Li metal negative electrode is paired with a high-areal-capacity LiNi0.83Co0.11Mn0.06O2-based positive electrode in multi-layer pouch cell configuration, the battery delivers an initial capacity of 6.86 Ah (corresponding to a specific energy of 489.7 Wh/kg) and, a 91.1% discharge capacity retention after 150 cycles at 2.5 mA/cm2, 25 °C and 172 kPa.
25 February 2026 in Nature
20 May 2025 in Angewandte Chemie International Edition
The performance of lithium metal batteries is significantly affected by temperature variations, which makes it challenging for them to operate across a wide temperature range. Herein, a wide temperature adaption electrolyte is proposed, enabling excellent electrochemical performance of lithium metal batteries from −40 °C to 60 °C. Large, 5.8 Ah pouch cells employing such an electrolyte achieve high energy density of 503.3 Wh kg −1 at 25 °C with a lifespan of 260 cycles and outstanding energy density of 339 Wh kg −1 at −40 °C. The critical role of the solid electrolyte interphase (SEI) in determining the temperature‐dependent performance of lithium metal batteries is unveiled. It is demonstrated that the LiF‐rich, anion‐derived SEI facilitates Li + diffusion in SEI. Moreover, accelerated Li + desolvation at SEI is observed. These two aspects promote the kinetics of lithium metal anodes and further inhibit the dendrite growth at low temperatures. This work showcases the importance of understating the chemistry of SEI to enable wide temperature lithium metal batteries.