Published data on the application of the chromaticity method in analytical chemistry in the past 15 years are systematized and analyzed. Attention is focused on the analytical aspects of the...
1 December 2010 in Moscow University Chemistry Bulletin
The optical and tsvetometric characteristics of 4-dimethylaminoazobenzen-4′-sulphoacid (methyl orange, MO) in water solutions at pH 2–9 are studied. The equations of calibration plots of the dependence of colorimetric functions on concentration are obtained and calculated as molar coefficients of colorimetric functions. The method determines The constants of MO dissociation at an ionic force of 0.01–0.2 are determined by spectrophotometry; they are given to an ionic force of 0 and are compared to the literature data. The advantages of tsvetometry over spectrophotometry are shown in determining the MO concentration.
1 December 2011 in Moscow University Chemistry Bulletin
The photometric detection of urea with the use of p-dimethylaminobenzaldehyde as a reagent has been develeped. The method allows one to reliably determine 10 mg/L of urea with the volume of an aliquot of 10 mL. The method has been applied for the determination of urea in river water.
1 July 2013 in Moscow University Chemistry Bulletin
The light-absorption spectra of solutions of chromium(VI) in the form of dichromate (pH 1–5) and chromate (pH 7–9) have been studied. The solutions have maxima of light absorption at 360 and 380 nm and molar extinction coefficients of 155 ± 7 and 935 ± 27 for Cr2O 72− and Cr O 42− respectively. The chromaticity functions of these chromium(VI) forms have been investigated and it has been shown that they are 1.0–1.5 orders of magnitude higher than the molar extinction coefficients. In all cases, the yellowness is maximal.
1 January 2014 in Moscow University Chemistry Bulletin
The formation of [FeSCN]2+ complex in hydrochloric and sulfuric acid medium was studied by spectrophotometry using iron(III) sulfate and ammonium iron(III) sulfate solutions as reactants. A method for the determination of 10–200 μg SCN− in 25 mL water solutions containing ammonium iron(III) sulfate in sulfuric acid medium was developed; its determination limit is 2.6 μg (P = 0.99, n = 9). The method was applied for the analysis of model water samples with macro- and micro-component compositions similar to that of water from the Arigol licensed area. Operational control of the accuracy rate was performed by the standard addition method. The developed method can be applied to analyze water samples containing 1–90 mg/L thiocyanate ions.
1 August 2010 in Moscow University Chemistry Bulletin
Optimal conditions of complexation copper(II) with 1-nitroso-2-naphtol-3,6-disulfonic acid were found by the spectrophotometric method. The optimum pH interval for the formation of a complex is...