13 August 2019 in Journal of Physics D: Applied Physics
NSNicolo Roberto Sernicola
The ability to make devices that mimic the human brain has been a subject of great interest in scientific research in recent years. Current artificial intelligence algorithms are primarily executed on the von Neumann hardware. This causes a bottleneck in processing speeds and is not energy efficient. In this work, we have demonstrated a synaptic element based on a magnetic domain wall device. The domain wall motion was controlled with the use of synthetic pinning sites, which were introduced by boron (B + ) ion-implantation for local modification of the magnetic properties. The magnetization switching process of a Co/Pd multilayer structure with perpendicular magnetic anisotropy was observed by using MagVision Kerr microscopy system. The B + implantation depth was controlled by varying the thickness of a Ta overcoat layer. The Kerr microscopy results correlate with the electrical measurements of the wire which show multiple resistive states. The control of the domain wall motion with the synthetic pinning sites is demonstrated to be a reliable technique for neuromorphic applications.
20 March 2023 in Applied Physics Letters
Spin–orbit torque (SOT) induced magnetization switching and SOT modulation by interfacial coupling exhibit good potential in spintronic devices. In this work, we report the enhancement of damping-like field and SOT efficiency of up to 60% and 23%, respectively, in perpendicularly magnetized Pt/Co/HfOx heterostructures over a Pt/Co system at an optimal thickness of 2 nm HfOx. The SOT improvement is primarily attributed to the interfacial oxidization of the Co layer, and the strength is tunable via voltage-induced oxygen ion migration at the Co/HfOx interface. Our measurement reveals that by controlling gate voltages, the Co oxidation can be increased, which leads to the SOT efficiency enhancement. Our work promotes the SOT enhancement and modulation by oxidation effects for energy-efficient spintronic devices.
1 April 2019 in Journal of Magnetism and Magnetic Materials
23 February 2018 in Journal of Physics D: Applied Physics
A combination of the harmonic measurement and in situ Kerr imaging was used to experimentally determine the spin–orbit (SO) effective fields in a MgO/CoFeB/Ta structure. Here, we evaluate the SO effective fields through an analytical energy approach by transforming the anomalous Hall effect and planar Hall effect (PHE) voltage into a field dependency while imaging the magnetisation behaviour by differential Kerr microscopy. The analytical fitting to the measurement data indicates the significant coexistence of both a transverse field, , and longitudinal field, , in the longitudinal ( H L = –12 Oe, H T = 8 Oe per 10 6 A cm −2 ) and transverse ( H L = –12 Oe, H T = –17 Oe per 10 6 A cm −2 ) measurement schemes, respectively, due to the PHE. Additionally, dendritic-like domains, indicating the influence of the interfacial Dzyaloshinskii–Moriya interaction (DMI) at the CoFeB/Ta interface, were observed by in situ Kerr imaging. Micromagnetic simulations confirm the dendritic domain formation and edge tilting of the magnetisation, as being due to the DMI.
6 August 2018 in Journal of Physics D: Applied Physics
Due to its low-dissipative nature, electric field control on magnetic materials can greatly improve the energy efficiency of spintronic devices. Here, we demonstrate the use of a polymer, MaN2401 as an insulating layer for electric field control on a Hall cross structure comprising of a Pt/Co/SiO 2 heterostructure. The results show that electric field control is able to tune the coercivity of the magnetic Hall crosses up to percentage changes of −47 and +68%, corresponding to a change in thickness of the Co layer by ~0.4 nm. This provides evidence that validates the mechanism of the magneto-ionic effect from the thickness of the magnetic material instead of detecting the oxidation state at the Co/oxide interface. Dynamic studies conducted on the coercivity of the Hall crosses indicate that a thinner insulating polymer layer produces a higher rate of change in the coercivity of the device. The results presented here offer a fast and repeatable method to observe and study electric field control, paving the way towards the realization of a low-power spintronic device on a flexible substrate.
1 March 2025 in Applied Physics Letters
In this work, we report a magnonic device capable of dynamic control over magnon propagation. By leveraging voltage-controlled magnetic anisotropy on yttrium iron garnet waveguides, we have carried out simulations of an active demultiplexer and half-adder designed using inverse design principles. A high output intensity multiplexer was similarly developed via inverse design to mitigate the magnon re-emission issue in Y-shaped combiners. Trapezoid electrodes were also introduced to minimize magnon intensity losses due to the magnetic anisotropy gradients across the cascading magnon circuit. The magnonic half-adder, constructed using active demultiplexers and a multiplexer, showcases the potential of magnonic logic circuits for binary addition operations.