1 January 2026 in IEEE Electron Device Letters
This work introduces an asymmetric structure for a 2-transistor gain cell realized by a write transistor with gate-to-source/drain underlap and an overlapped read transistor. This asymmetric topology enables voltage sensing while substantially minimizing the word line to storage node capacitive coupling. Utilization of an underlapped write transistor reduces the storage node voltage disturbances during word line toggling. The overlapped structure of the read transistor increases the storage node capacitance, thereby improving the sense margin for robust voltage sensing. The concept is experimentally demonstrated using an amorphous oxide semiconductor-based asymmetric 2T gain cell, paving the way for monolithic 3D-integrated last-level cache at the back-end-of-line.
5 December 2024 in IEEE Transactions on Electron Devices
Large spiking neural networks (SNNs) require ultralow power and low variability hardware for neuromorphic computing applications. Recently, a band-to-band tunneling (BTBT)-based integrator was proposed, enabling the sub-kHz operation of neurons with area and energy efficiency. For an ultralow-power implementation of such neurons, a very low BTBT current is needed, so minimizing current without degrading neuronal properties is essential. Low variability is needed in the ultralow current integrator to avoid network performance degradation in a large BTBT neuron-based SNN. This work addresses device optimization to achieve low BTBT current. We conducted design space and variability analysis in technology computer-aided design (TCAD), utilizing a well-calibrated TCAD deck with experimental data from GlobalFoundries (GFs) 32 nm partially depleted silicon-on-insulator (PD-SOI) MOSFET. First, we discuss the physics-based explanation of the tunneling mechanism. Second, we explore the impact of device design parameters on SOI MOSFET performance, highlighting parameter sensitivities to tunneling current. With device parameters’ optimization, we demonstrate a $\sim$ 20 $\times$ reduction in BTBT current compared to the experimental data. Finally, a variability analysis that includes the effects of random dopant fluctuations (RDFs), oxide thickness variation (OTV), and channel–oxide interface traps ( D $_{\text{IT}}$ ) in the BTBT, subthreshold (SS), and ON regimes of operation is shown. The BTBT regime shows the highest sensitivity to OTV, with variability increasing by up to 25 $\times$ compared to the SS regime. In contrast, RDF and D $_{\text{IT}}$ variability resulted in a 1.25 $\times$ to $\sim$ 10 $\times$ lower coefficient of variation (CV) in the BTBT regime than in the SS regime, indicating better resilience to these sources of variability. The study provides essential design guidelines to enable energy-efficient neuromorphic computing, achieving biologically plausible sub-kHz spiking frequencies.
30 September 2024 in IEEE Transactions on Electron Devices
Low-power operations are essential for implementing large spiking neural networks (SNNs) in real-world applications. An area and energy-efficient demonstration of a functional liquid state machine (LSM) for spoken word detection using the band-to-band-tunneling (BTBT)-based neuron was proposed earlier. For a product-level demonstration of the BTBT regime operating chips, the variability and reliability of neurons emerge as noteworthy concerns for neuromorphic processors due to the potential implications for performance degradation over time. In this work, we characterize and compare the reliability of partially depleted (PD) silicon on insulator (SOI) transistors in the BTBT and on-regime ( ${I}_{\text {ON}}$ ) regimes. The drain current fractional degradation ( ${\Delta }{I}_{\text {D}}/{I}_{\text {D}}$ ) increases with an increase in voltage and thermal stress in the BTBT and ${I}_{\text {ON}}$ regime. The reaction-diffusion-drift (RDD) framework is used to estimate device degradation under operating bias conditions. At operating bias, a ~17% fractional degradation is observed in the BTBT regime operation for ten years, comparable to the degradation observed in the ${I}_{\text {ON}}$ regime. Finally, we analyzed the impact of device degradation on the SNN performance.
1 January 2026 in IEEE Open Journal of the Solid-State Circuits Society
10 October 2024 in IEEE Transactions on Electron Devices
The compact and energy-efficient integrated temperature sensors are crucial for temperature monitoring and control. In this work, we propose a novel area and energy-efficient band-to-band tunneling (BTBT)-based oscillator for temperature sensing applications. It utilizes oscillation frequency as a metric for temperature sensing. The linearity in BTBT current with temperature can enable sensing with a simple readout mechanism. The initially designed circuit is simulated and analyzed in TCAD using mixed-mode simulation, followed by the fabrication of the proposed circuit using GF 45nm RFSOI technology. Measurements show the BTBT oscillator’s quasi-linear response as a function of temperature. Our proposed work enables the area ( $0.32~\mu \text { m}^{{2}}$ ) and energy-efficient temperature sensor (2.5 fJ/cycle) for the energy and area-constraint edge applications.