6 February 2024 in Nature Communications
Stretchable electronics that prevalently adopt chemically inert metals as sensing layers and interconnect wires have enabled high-fidelity signal acquisition for on-skin applications. However, the weak interfacial interaction between inert metals and elastomers limit the tolerance of the device to external friction interferences. Here, we report an interfacial diffusion-induced cohesion strategy that utilizes hydrophilic polyurethane to wet gold (Au) grains and render them wrapped by strong hydrogen bonding, resulting in a high interfacial binding strength of 1017.6 N/m. By further constructing a nanoscale rough configuration of the polyurethane (RPU), the binding strength of Au-RPU device increases to 1243.4 N/m, which is 100 and 4 times higher than that of conventional polydimethylsiloxane and styrene-ethylene-butylene-styrene-based devices, respectively. The stretchable Au-RPU device can remain good electrical conductivity after 1022 frictions at 130 kPa pressure, and reliably record high-fidelity electrophysiological signals. Furthermore, an anti-friction pressure sensor array is constructed based on Au-RPU interconnect wires, demonstrating a superior mechanical durability for concentrated large pressure acquisition. This chemical modification-free approach of interfacial strengthening for chemically inert metal-based stretchable electronics is promising for three-dimensional integration and on-chip interconnection.
1 July 2025 in Nature Communications
Real-time sensing and processing of tactile information are essential to enhance the capability of artificial electronic skins (e-skins), enabling unprecedented intelligent applications in tactile exploration and object manipulation. However, conventional tactile e-skin systems typically execute redundant data transfer and conversion for decision making due to their physical separation between sensors and processing units, leading to high transmission latency and power consumption. Here, we report an in-sensor tactile computing system based on a flexible capacitive pressure sensor array. This system utilizes multiple connected sensor networks to execute in-situ analog multiplication and accumulation operations, achieving both tactile sensing and computing functionalities. We experimentally implemented the in-sensor tactile computing system for low-level tactile sensory processing tasks including noise reduction and edge detection. The consumed power for single sensing-computing operation is over 22 times lower than that of a conventional mixed electronic system. These results demonstrate that our capacitive in-sensor computing system paves a promising way for power-constrained applications such as robotics and human-machine interfaces.
23 November 2023 in IEEE Electron Device Letters
Implementation of biohybrid artificial synapses capable of neurotransmitter regulation is a key to establishing active interactions with biological tissues. In this letter, we report a fully printed biohybrid artificial synapse based on an organic electrochemical transistor (OECT) device with low driving voltages (<1 V), good reproducibility and stability. The OECT shows not only short-term plasticity dominated by sodium ionic dynamic, but also dopamine-mediated long-term plasticity. Furthermore, a dual-gate OECT-based artificial synapse was obtained using the printing technique, aiming to mimic multiple presynaptic dopamine stimulations. Logic AND operation and continuous dopamine-mediated plasticity were subsequently demonstrated in the dual-gate OECT synapse. These results show that the fully printed OECT device can sever as a promising candidate for artificial synapses with dopamine-mediated plasticity for bio-electronic interfaces.
12 April 2024 in IEEE Electron Device Letters
In this letter, we report a fully printed metal-oxide memristor crossbar array based on the Ag/ZnO/Ag structure, and extend its neuromorphic computing application as artificial synapses. The wurtzite-type ZnO is printed as an active layer, which is sandwiched between two printed Ag electrodes, forming a memristor unit. The printed memristor exhibits volatile resistive switching behaviors under a low compliance current of $1~\mu \text{A}$ , and can emulate the short-term synaptic plasticity and biological “learning-relearning” processes. More importantly, the image learning and forgetting function is successfully demonstrated in a $3\times3$ printable memristor array. These results show that the printing technique offers a promising path towards large-scale and low-cost neuromorphic computing electronics.
18 December 2023 in Applied Physics Letters
Metal oxide-based memristors usually exhibit robust resistive switching characteristics but poor mechanical tolerance, limiting their applications in wearable intelligent electronics. Here, we report a highly flexible and robust hafnium oxide-based memristor by using the ultrathin substrate for wearable in-memory computing. The fabricated memristor can display reliable resistive switching behaviors, including low switching voltage, good endurance, and excellent uniformity, under an extremely bending state with the radius of 0.8 mm. The mechanical behavior of the flexible memristor with varying substrate thickness is systematically analyzed using the finite element method. Moreover, typical synaptic plasticity including long-term potentiation and long-term depression was verified under the extremely bending state. Based on the highly flexible and robust memristor device, a three-layer neural network was constructed using a software simulator, achieving a recognition accuracy of 90.49% for handwritten digit recognition under the bending state. These results demonstrate our robust memristor synapse shows high mechanical flexibility, paving a promising way to realizing wearable in-memory computing.
8 July 2024 in IEEE Electron Device Letters
In this letter, we report an efficient and affordable RC system where the masking process in input and reservoir layers are implemented by nonvolatile and volatile memristors, respectively. The nonvolatile memristors with a TiN/HfOx/TaOx/TiN structure show multilevel programmable resistance states, serving as multi-value mask matrices to increase the richness of reservoir state. Meanwhile, Ag/guar gum-WTe2 nanohybrid/Au biomemristor synapses exhibit short-term memory and nonlinear dynamics, fulfilling the implementation of physical reservoirs. The performance of the RC system was further evaluated by the tasks of speech digit recognition and electrocardiogram waveform classification. By implementing the multi-value mask, the accuracy rates of these two tasks were improved to 99.6% and 99.2%, respectively. Our findings suggest that the multi-value RC system shows a great potential for processing complex temporal signals in a low-cost and energy-efficient manner.