Kangsu Lee

Kangsu Lee

Auto-generated profile, based on publicly available information

Kangsu Lee

Korea Research Institute of Ships and Ocean Engineering 2 , Daejon 34103, South Korea

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 February 2016 in Journal of the Korean Society for Marine Environment & Energy
Verified
Journal Article
Closed access
kyong-hwan kimkyong-hwan kim
kyong-hwan kim
JHJang Pyo Hong
Jang Pyo Hong
SPSewan Park
Sewan Park
KLKangsu Lee
Kangsu Lee
Keyyong HongKeyyong Hong
Keyyong Hong
본 연구에서는 대형 부유식 파력-해상풍력 복합발전 구조물의 극한환경 운동 성능에 관한 실험적 연구를 다루고 있다. 대형 부유식 복합발전 구조물에 대한 운동 성능을 평가하기 위하여 1/50 축척비의 모형을 제작하였다. 그리고 설계된 계류선의 사양에 부합하는 계류선 모형을 제작하였고 자유감쇠시험 및 static pull-out 시험을 통하여 검증하였다. 주어진 구조물의 수심을 만족하기 위하여 계류선 테이블을 도입하고 환경조건에 계류판에 따른 환경조건을 확인하였다. 모형시험에서 규칙파 중 운동응답을 확인하고 파랑, 조류, 바람의 복합환경 하중을 적용하여 극한환경 운동성능을 해석하였다. 최대 운동 및, 가속도를 계측하여 운동 안전성을 판단하였고 최대 변위와 계류 하중도 선급기준에 따라 판단하였다. 이로부터 복합발전 구조물의 운동 특성에 대하여 토의하였다.

1 May 2018 in Journal of Renewable and Sustainable Energy
Verified
Journal Article
Closed access
PDF file
Sang LeeSang Lee
Sang Lee
KKKyong-Hwan Kim
Kyong-Hwan Kim
KLKangsu Lee
Kangsu Lee
SPSewan Park
Sewan Park
KHKeyyong Hong
Keyyong Hong
Large-eddy simulations were performed on a set of various offshore atmospheric boundary layer flows with four 3-MW wind turbines separated by 1.5 rotor diameters. The damage equivalent loads were higher for the fore-aft tower base moment, which is typically found for downstream turbines. However, the flapwise blade root moments exhibited lower fluctuations for the downstream turbines, which was attributed to the removal of the shear in the flow by the upstream wake. Strong sensitivities were shown in the resulting loads with respect to the wind directions, in which the 22.5° wind direction yielded the largest load fluctuations. While the power production was improved in this wind direction, the damage equivalent loads for the downstream turbines were nearly twice those of the upstream turbines for the flapwise moment at the blade root which can significantly increase the likelihood of premature blade failure. To alleviate the fatigue, the blade pitch control approach was investigated for both the upstream and downstream turbines. It was found that reducing the blade pitch for the downstream turbines significantly reduced the damage equivalent load. Increasing the wind speed required further reductions in the blade pitch angle which decreased the overall power production.

25 August 2016 in Journal of the Korean Society for Marine Environment & Energy
Verified
Journal Article
Closed access
Chang-Yong SONGChang-Yong SONG
Chang-Yong SONG
KLKangsu Lee
Kangsu Lee
Keyyong HongKeyyong Hong
Keyyong Hong
본 연구에서는 10 MW급 부유식 파력-풍력 복합발전 시스템의 플랫폼 초기 개념설계를 위해 유한요소해석 기반 위상최적화를 검토하였다. 실제 파력-풍력 복합발전 시스템 플랫폼의 위상최적화를 수행하기 전에 단순화된 구조설계 문제를 이용하여 효율적인 위상최적화 이론을 확인하고자 밀도법과 균질화설계법의 두 가지 위상최적화 이론을 적용하였다. 단순화된 설계 문제의 결과로부터 균질화설계법 이론을 파력-풍력 복합발전 시스템의 플랫폼 위상최적화에 적용하였다. 파력-풍력 복합발전 시스템의 플랫폼 개념설계를 위해서 유한요소해석 모델을 생성하고 설치해역의 해양환경하중을 고려하여 구조해석을 수행하였다. 설계파 및 조류와 같은 해양환경하중으로부터 기인하는 플랫폼 상의 압력과 계류삭의 인장력을 산출하기 위하여 동수력학 해석을 수행하였다. 구조해석을 위한 하중조건은 부유체 동수력학 해석으로부터의 결과와 파력-풍력 복합발전 시스템 중량을 고려하였고, 경계조건은 관성제거법을 사용하여 구현하였다. 밀도법 기반 파력-풍력 복합발전 시스템 플랫폼의 위상최적화 결과로부터 개념설계 단계에서 주요 구조부재의 배치방안을 제시하였다. 본 연구결과로부터 위상최적화는 부유식 파력-풍력 복합발전 시스템과 같은 새로운 형식의 해양구조물 개발에 있어서 주요 구조부재 배치의 개념설계에 대해 유용한 설계도구임을 확인하였다.