1 February 2024 in Physics of Fluids
The atomization process of liquid fuels is vital in scramjet engines. The level of atomization directly impacts the subsequent evaporation, mixing, and combustion processes. Therefore, understanding the atomization mechanism of liquid jets in crossflow is necessary to promote the mixing process of scramjet engines and improve the combustion efficiency. This article overviews the atomization process of liquid jets in transverse airflow based on the breakup mechanism, atomization characteristics, and factors affecting atomization. The deformation and fragmentation of droplets are influenced primarily by the Weber number and have little correlation with the Reynolds number. There are similarities in the properties between the primary fragmentation of liquid jets and the breakup of liquid droplets in crossflow. The primary breakup of liquid jets in crossflow is characterized primarily by continuous jet column breakup. The Rayleigh–Taylor instability causes columnar breakup, while the Kelvin–Helmholtz instability causes surface breakup in the jet. The size distribution of droplets follows C-, I-, or S-shaped distributions, while the velocity distribution of droplets follows an inverse C-shape. Finally, the shortcomings of current research are pointed out, namely, the lack of research on the jet breakup mechanism in crossflow under actual scramjet engine configurations and inflow conditions. In the future, it can be combined with artificial intelligence to reveal the jet breakup mechanism under actual working conditions and establish a wide range of theoretical prediction models.
1 September 2023 in Physics of Fluids
The generic inlet is depicted based on a smooth Bézier curve, and the results and insights from high-dimensional dynamic multi-objective optimization of small-sample high Mach number axisymmetric scramjet inlets are discussed in detail. The optimization is performed by integrating a Kriging surrogate model-assisted improved congestion distance multi-objective particle swarm optimization algorithm and computational fluid dynamics simulation. The steady-state flow field is derived by solving the Euler equation using self-developed hypersonic internal and external flow coupling numerical simulation software, which is designed to minimize inlet surface area and drag while improving the total pressure recovery factor. The results revealed that the generic inlet can achieve a total pressure recovery capability exceeding 95%, with minimal surface area and drag. The prediction error, mean absolute percentage error, of the performance dynamic surrogate model based on Kriging is less than 1%, and the performance parameter optimization shows an improvement greater than 8% compared to static multi-objective optimization results. Ultimately, the obtained Pareto solution set is grouped by K-means feature recognition, contributing to a comprehensive understanding of the flow physics knowledge related to optimal geometric local shape control. Finally, an inward-turning inlet is designed by streamline tracking technology based on the optimized axisymmetric scramjet inlet primary flow field.
18 February 2024 in Advances in Aerodynamics
The combustion performance of a scramjet engine is based on a two-phase mixing process of its fuel. To elucidate the mechanism of jet atomization in supersonic airflows, a numerical simulation of liquid jet atomization in a supersonic crossflow is carried out. The Euler method is used to calculate the gas phase, while the Lagrangian particle tracking method is used to calculate the liquid phase. The Reitz wave model is used to simulate the first breakup of the liquid jet, and the Kelvin-Helmholtz/Rayleigh-Taylor hybrid breakup model is used to simulate the second breakup of the droplets. The influence of the liquid/gas momentum flux ratio and the diameter of the jet on the atomization characteristics is discussed. The results show that the penetration depth increases with increasing nozzle diameter and liquid/gas momentum flux ratio. A jet with a larger liquid/gas momentum flux ratio breaks faster, and its Sauter mean diameter is smaller. The Sauter mean diameter of a droplet decreases with decreasing nozzle diameter. At 30 mm downstream of the nozzle, all jets are basically atomized, and the SMD of the jet is around 10 μm. The nozzle diameter has a greater influence on the jet penetration depth than does the liquid/gas momentum flux ratio.
11 October 2024 in Aerospace Science and Technology
1 July 2024 in Physics of Fluids
To alleviate the problem of high-fidelity data dependence and inexplicability in pure data-driven neural network models, physical informed neural networks (PINNs) provide a new learning paradigm. This study constructs an efficient, accurate, and robust PINN framework for predicting unsteady combustion flow fields based on Navier–Stokes (NS) equation constraints. To achieve fast prediction of a multi-physical field in a scramjet combustion chamber, we propose a U-shaped residual neural network model based on feature information fusion. The model uses a residual neural network module as the backbone, uses jump connection to improve model generalization, and uses the U-shaped structure to fuse the receptive field features with different scales to enhance the feature expression ability of the model. To prevent improper assumptions from leading to wrong method constraints, we consider the flow characteristic mechanism of each physical field to constrain the neural network and verify its accuracy through numerical simulation of the unsteady flow field in the scramjet combustor with Mach number (Ma) 2.0. This method can accurately predict the multi-physical field of unsteady turbulent combustion based on the time, space, Ma and turbulent eddy viscosity coefficients of a small number of samples. Specially, the proposed physical driven and data driven fusion proxy model can predict the unsteady combustion flow field in milliseconds. It has important reference value to solve the problem of low calculation efficiency of a traditional numerical simulation method of a combustion process.