9 December 2011 in Science
The efficiency of many energy storage technologies, such as rechargeable metal-air batteries and hydrogen production from water splitting, is limited by the slow kinetics of the oxygen evolution reaction (OER). We found that Ba0.5Sr0.5Co0.8Fe0.2O3–δ (BSCF) catalyzes the OER with intrinsic activity that is at least an order of magnitude higher than that of the state-of-the-art iridium oxide catalyst in alkaline media. The high activity of BSCF was predicted from a design principle established by systematic examination of more than 10 transition metal oxides, which showed that the intrinsic OER activity exhibits a volcano-shaped dependence on the occupancy of the 3d electron with an eg symmetry of surface transition metal cations in an oxide. The peak OER activity was predicted to be at an eg occupancy close to unity, with high covalency of transition metal–oxygen bonds.
1 March 2005 in Applied Catalysis B: Environment and Energy
12 June 2011 in Nature Chemistry
The prohibitive cost and scarcity of the noble-metal catalysts needed for catalysing the oxygen reduction reaction (ORR) in fuel cells and metal–air batteries limit the commercialization of these clean-energy technologies. Identifying a catalyst design principle that links material properties to the catalytic activity can accelerate the search for highly active and abundant transition-metal-oxide catalysts to replace platinum. Here, we demonstrate that the ORR activity for oxide catalysts primarily correlates to σ*-orbital (eg) occupation and the extent of B-site transition-metal–oxygen covalency, which serves as a secondary activity descriptor. Our findings reflect the critical influences of the σ* orbital and metal–oxygen covalency on the competition between O22–/OH– displacement and OH– regeneration on surface transition-metal ions as the rate-limiting steps of the ORR, and thus highlight the importance of electronic structure in controlling oxide catalytic activity.
1 January 2010 in Journal of the Electrochemical Society
The kinetics of the hydrogen oxidation reaction (HOR) and hydrogen evolution reaction (HER) on polycrystalline platinum [Pt(pc)] and high surface area carbon-supported platinum nanoparticles (Pt/C) were studied in 0.1 M KOH using rotating disk electrode (RDE) measurements. After corrections of noncompensated solution resistance from ac impedance spectroscopy and of hydrogen mass transport in the HOR branch, the kinetic current densities were fitted to the Butler–Volmer equation using a transfer coefficient of α = 0.5 , from which HOR/HER exchange current densities on Pt(pc) and Pt/C were obtained, and the HOR/HER mechanisms in alkaline solution were discussed. Unlike the HOR/HER rates on Pt electrodes in alkaline solution, the HOR/HER rates on a Pt electrode in 0.1 M HClO[subscript 4] were limited entirely by hydrogen diffusion, which renders the quantification of the HOR/HER kinetics impossible by conventional RDE measurements. The simulation of the hydrogen anode performance based on the specific exchange current densities of the HOR/HER at Formula illustrates that in addition to the oxygen reduction reaction cell voltage loss on the cathode, the slow HOR kinetics are projected to cause significant anode potential losses in alkaline fuel cells for low platinum loadings (130 mV at [superscript 0.05 mg] Pt / [superscript cm [superscript 2]] anode and [superscript 1.5 A/ cm [superscript 2]] anode), contrary to what is reported for proton exchange membrane fuel cells.United States. Dept. of Energy. Hydrogen Initiative Program (Award DE-FG02-05ER15728)National Science Foundation (U.S.). Materials Research Science and Engineering Centers (Program) (Award DMR 08-19762
11 April 2014 in Energy & Environmental Science
The effect of pH on the hydrogen oxidation and evolution reaction (HOR/HER) rates is addressed for the first time for the three most active monometallic surfaces: Pt, Ir, and Pd carbon-supported catalysts. Kinetic data were obtained for a proton exchange membrane fuel cell (PEMFC; pH ≈ 0) using the H2-pump mode and with a rotating disk electrode (RDE) in 0.1 M NaOH. Our findings point toward: (i) a similar ≈100-fold activity decrease on all these surfaces when going from low to high pH; (ii) a reaction rate controlled by the Volmer step on Pt/C; and (iii) the H-binding energy being the unique and sole descriptor for the HOR/HER in alkaline electrolytes. Based on a detailed discussion of our data, we propose a new mechanism for the HOR/HER on Pt-metals in alkaline electrolytes.
1 January 2005 in Journal of the Electrochemical Society
Equilibrium concentrations of dissolved platinum species from a <mml:math display="inline"><mml:mrow><mml:mi>Pt</mml:mi><mml:mo>∕</mml:mo><mml:mi mathvariant="normal">C</mml:mi></mml:mrow></mml:math>Pt∕C electrocatalyst sample in 0.5 M <mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="normal">H</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub><mml:mi mathvariant="normal">S</mml:mi><mml:msub><mml:mi mathvariant="normal">O</mml:mi><mml:mrow><mml:mn>4</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>H2SO4 at 80°C were found to increase with applied potential from 0.9 to 1.1 V vs reversible hydrogen electrode. In addition, platinum surface area loss for a short-stack of proton exchange membrane fuel cells (PEMFCs) operated at open-circuit voltage <mml:math display="inline"><mml:mrow><mml:mo>(</mml:mo><mml:mo>∼</mml:mo><mml:mn>0.95</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi mathvariant="normal">V</mml:mi><mml:mo>)</mml:mo></mml:mrow></mml:math>(∼0.95V) was shown to be higher than another operated under load <mml:math display="inline"><mml:mrow><mml:mo>(</mml:mo><mml:mo>∼</mml:mo><mml:mn>0.75</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi mathvariant="normal">V</mml:mi><mml:mo>)</mml:mo></mml:mrow></mml:math>(∼0.75V) . Both findings suggest that the formation of soluble platinum species (such as <mml:math display="inline"><mml:mrow><mml:msup><mml:mi>Pt</mml:mi><mml:mrow><mml:mn>2</mml:mn><mml:mo>+</mml:mo></mml:mrow></mml:msup></mml:mrow></mml:math>Pt2+ ) plays an important role in platinum surface loss in PEMFC electrodes. As accelerated platinum surface area loss in the cathode (from 63 to <mml:math display="inline"><mml:mrow><mml:mn>23</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:msup><mml:mi mathvariant="normal">m</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msup><mml:mo>∕</mml:mo><mml:msub><mml:mi mathvariant="normal">g</mml:mi><mml:mi>Pt</mml:mi></mml:msub></mml:mrow></mml:math>23m2∕gPt in <mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>100</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi mathvariant="normal">h</mml:mi></mml:mrow></mml:math>∼100h ) was observed upon potential cycling, a cycled membrane electrode assembly (MEA) cathode was examined in detail by incidence angle X-ray diffraction and transmission electron microscopy (TEM) to reveal processes responsible for observed platinum loss. In this study, TEM data and analyses of <mml:math display="inline"><mml:mrow><mml:mi>Pt</mml:mi><mml:mo>∕</mml:mo><mml:mi mathvariant="normal">C</mml:mi></mml:mrow></mml:math>Pt∕C catalyst and cross-sectional MEA cathode samples unambiguously confirmed that coarsening of platinum particles occurred via two different processes: (i) Ostwald ripening on carbon at the nanometer scale, which is responsible for platinum particle coarsening from <mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>3</mml:mn></mml:mrow></mml:math>∼3 to <mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>6</mml:mn><mml:mspace width="0.3em"></mml:mspace><mml:mi>nm</mml:mi></mml:mrow></mml:math>∼6nm on carbon, and (ii) migration of soluble platinum species in the ionomer phase at the micrometer scale, chemical reduction of these species by crossover <mml:math display="inline"><mml:mrow><mml:msub><mml:mi mathvariant="normal">H</mml:mi><mml:mrow><mml:mn>2</mml:mn></mml:mrow></mml:msub></mml:mrow></mml:math>H2 molecules, and precipitation of platinum particles in the cathode ionomer phase, which reduces the weight of platinum on carbon. It was estimated that each process contributed to <mml:math display="inline"><mml:mrow><mml:mo>∼</mml:mo><mml:mn>50</mml:mn><mml:mo>%</mml:mo></mml:mrow></mml:math>∼50% of the overall platinum area loss of the potential cycled electrode.