The rate of photodegradation of the fungicide fenarimol (α-(2-chlorophenyl)-α-(4-chlorophenyl)-5-pyrimidine-methanol) by solar radiation has been studied in natural waters with different salinities. Photodegradation rates and quantum yields are found to decrease with increasing salinity. To explain this behaviour, experiments were performed with different salt solutions (NaCl, NaBr, BaCl2 and ZnCl2) using both solar irradiation and a photoreactor (λexcit 313 nm). As with natural waters, marked effects of added salt were observed on the photolysis rate, which decreased significantly from 0.67 h−1 in the absence of salt to 0.11 h−1 in the presence of BaCl2. In photoreactor studies, the observed order of quenching was BaCl2>ZnCl2 and NaBr>NaCl. In contrast, neither the triplet state quencher sorbic acid nor oxygen had any effect on the photolysis, supporting the idea that photodegradation goes by the lowest excited singlet state of fenarimol. To understand the origin of the effect of added salts, fluorescence quenching studies have been performed with various halide and nonhalide salts and the respective quenching constants determined. With NaCl and NaBr, the ratio of fluorescence quenching constants is identical to the ratio of reciprocal quantum yields for photodegradation of fenarimol, indicating a common mechanism. The correlation of fluorescence quenching rates with halide ion oxidation potentials strongly suggests that this involves an electron transfer mechanism. It is suggested that the effect may be used to stabilise the fungicide towards photodegradation.
1 January 2003 in International Journal of Photoenergy
Photocatalytic TiO2 films on glass and quartz plates were obtained by the chemical vapour deposition using Ti(dpm)2(Opri)2 complex compound (CC‐CVD method) in a standard vacuum apparatus at 1.2–2.0 × 10‐4 mbar. The substrate temperature was stabilised in the range of 450–600 ∘C. The growth rate varied from several nanometres to several dozen of nanometres per minute. Structural information on TiO2 thin films was obtained from synchrotron radiation experiments. High‐resolution grazing incidence X‐ray diffraction (GIXRD) experiments were performed at the high‐resolution powder diffractometer at the DESY/HASYLAB beamline B2 (Hamburg, Germany). Thin films deposited on either single‐crystal Si wafers or on amorphous quartz substrates were analysed. The photocatalytic activity of the TiO2 thin films was studied using a photocatalytic reactor. The fungicide Fenarimol was chosen as chemical indicator and its degradation kinetics was followed by High‐Performance Liquid Chromatography (HPLC).
The TiO2 thin films were prepared using Ti(dpm)2(OPri)2 and Ti(OPri)4 (dpm = 2,2,6,6-tetramethylheptane-3,5-dione, Pri = isopropyl) as the precursors. The volatile compounds Fe[(C2H5)2NCS2]3 and [(CH3)C]2S2 were used to prepare doped TiO2 films. The synthesis was done in vacuum or in the presence of Ar and O2. The pressure in the CVD chamber was varied between 1.2×104mbar and 0.1mbar, with the system working either in the molecular beam or gas flow regime. Physical, chemical, and photocatalytic properties of the (Fe, S)-doped TiO2 films were studied. Those TiO2:(Fe, S) films prepared from the Ti(OPri)4 precursor show increased photocatalytic activities, very close to those of Degussa P25 powder in UV region.