24 September 2018 in IEEE Transactions on Electromagnetic Compatibility
This paper evaluates the lightning-induced voltages of two typical multiconductor lines configurations with or without shielding wires over lossy ground for striking the cone-shaped mountain top, by means of a cylindrical two-dimensional finite-difference time-domain method and Agrawal coupling model. It is found that the lightning-induced voltages both for the vertical and the horizontal configurations can be enhanced obviously for striking to the cone-shaped mountain, compared with the case of flat terrain, especially for the lower finite ground conductivity. The larger mountain inclining angle results in the higher peak values of lightning-induced voltages, which can be explained by the enhancement of lightning electromagnetic fields due to wave reflection of the transition between mountain terrain and flat ground. Moreover, the shielding wires can effectively reduce the voltages induced at both ends of the phase lines.
27 September 2018 in IEEE Transactions on Electromagnetic Compatibility
This paper analyzes the effect of lightning strikes to an oblique cone-shaped mountain on the lightning-induced voltages on the power distribution line. The lightning-generated electromagnetic fields are calculated by using a three-dimensional finite-difference time-domain method in Cartesian coordinates, and the lightning-induced voltages are computed by means of Agrawal coupling model. The simulation results are presented for an oblique cone-shaped mountain with different inclining angles, and for different relative positions of the distribution line placed over nonflat lossy terrain. It is found that, when lightning strikes the top of an oblique cone-shaped mountain, the lightning-induced voltages are closely related with the mountain inclining angles where the distribution line is located above as well as the other mountain inclining angles; in general, the peak values of induced voltages increase with increasing inclining angles. For example, for the constant angle β = 45° (the inclining angle where the line is located above), the induced voltages at the close end of line for α = 26.6°, 45°, and 63.4° (the inclining angle opposite to angle β) is increased by 24%, 60%, and 106% as compared with that for flat ground, respectively.