Michael Anerella

Michael Anerella

Auto-generated profile, based on publicly available information

Michael Anerella

BNL, Upton, New York United States 11973

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 December 2017 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Open access
SSStoyan Stoynev
Stoyan Stoynev
GAGiorgio Ambrosio
Giorgio Ambrosio
MAMichael Anerella
Michael Anerella
RBRodger Bossert
Rodger Bossert
ECEugenio Cavanna
Eugenio Cavanna
MYMiao Yu
Miao Yu
The development of Nb3Sn quadrupole magnets for the High-Luminosity LHC upgrade is a joint venture between the US LHC Accelerator Research Program (LARP)* and CERN with the goal of fabricating large aperture quadrupoles for the LHC interaction regions (IR). The inner triplet (low-$\beta$) NbTi quadrupoles in the IR will be replaced by the stronger Nb3Sn magnets boosting the LHC program of having 10-fold increase in integrated luminosity after the foreseen upgrades. Previously LARP conducted successful tests of short and long models with up to 120 mm aperture. The first short 150 mm aperture quadrupole model MQXFS1 was assembled with coils fabricated by both CERN and LARP. The magnet demonstrated strong performance at the Fermilab's vertical magnet test facility reaching the LHC operating limits. This paper reports the latest results from MQXFS1 tests with changed pre-stress levels. The overall magnet performance, including quench training and memory, ramp rate and temperature dependence, is also summarized. * The US contributions to the HL-LHC upgrade will be under the US HL-LHC Accelerator Upgrade Project (US HL-LHC AUP)

5 January 2018 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Open access
RGRamesh Gupta
Ramesh Gupta
MAMichael Anerella
Michael Anerella
JCJohn Cozzolino
John Cozzolino
PJPiyush Joshi
Piyush Joshi
WSWilliam Sampson
William Sampson
EWErich Willen
Erich Willen
This paper presents the design, construction and test results of a hybrid dipole magnet. The inner coils were of second generation (2G) High Temperature Superconductor (HTS) ReBCO tape; the outer coils were of Low Temperature Superconductor (LTS) Nb3Sn Rutherford cable. The HTS and LTS coils were independently powered and protected using different power supplies. The HTS coils were quenched many times with no degradation in performance observed. The hybrid field reached ~8.6 T, which is believed to be a record for a hybrid dipole. The maximum field was limited by the stable operation of the leads in the LTS coil at 8,000 A. The HTS coils were independently ramped to 800 A, and the LTS coils to 10,000 A. With improved leads and instrumentation, this hybrid dipole is expected to produce over 13 T when the ReBCO tape in the HTS coil is aligned nearly parallel to the field. One major purpose of this program was to perform magnetization studies in the coils made with the HTS tape. Magnetization-induced field errors are expected to be small when the field is nearly parallel to the wide face of the tape. The magnetization measurements were performed at 77 K with the two racetrack coils in two orientations, with field predominantly either parallel or perpendicular to the wide face of the HTS tape. In addition, measurements were also performed at 4 K in different background fields provided by the outer Nb3Sn coils. This paper will summarize the magnetization measurements and present the quenching experience of the HTS coils in this hybrid magnet system.

18 March 2020 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
JMJoseph F. Muratore
Joseph F. Muratore
KAKathleen Amm
Kathleen Amm
MAMichael Anerella
Michael Anerella
GAGiorgio Ambrosio
Giorgio Ambrosio
GAGiorgio Apollinari
Giorgio Apollinari
PWPeter Wanderer
Peter Wanderer
The future high luminosity (Hi-Lumi) upgrade of the Large Hadron Collider (LHC) at CERN will include eight (plus two spares) 8.4 m-long cryostatted cold masses which will be components of the triplets for two LHC insertion regions. Each cold mass will consist of two 4.2 m long $\text{Nb}_3 \text{Sn}$ high gradient quadrupole magnets, designated MQXFA, with aperture 150 mm and operating gradient 132.6 T/m, for a total of twenty magnets. Before assembling and testing the final cold masses at Fermilab, the twenty component quadrupoles will be tested first at the vertical superconducting magnet test facility of the Superconducting Magnet Division at Brookhaven National Laboratory (BNL), in superfluid He at 1.9 K and to 18.0 kA, to meet LHC operational requirements. The first two full-length prototype quadrupole magnets, MQXFAP1 and MQXFAP2, have been tested at BNL. This paper reports on the quench test and training results of these magnets, and also the retest of the first prototype, rebuilt and designated as MQXFAP1b. The test results of these magnets will be important for validating the MQXFA design.

8 December 2017 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
JMJoseph F. Muratore
Joseph F. Muratore
MAMichael Anerella
Michael Anerella
PJPiyush Joshi
Piyush Joshi
PKPaul Kovach
Paul Kovach
AMAndrew Marone
Andrew Marone
PWPeter Wanderer
Peter Wanderer
The future high luminosity upgrade of the Large Had-ron Collider (LHC) at CERN will include twenty 4.2 m-long Nb$_\mathbf{3}$Sn high gradient quadrupole magnets which will be compo-nents of the triplets for two LHC insertion regions. In order to test these and four pre-production models, the vertical supercon-ducting magnet test facility of the Superconducting Magnet Divi-sion (SMD) at Brookhaven National Laboratory (BNL) has been upgraded to perform testing in superfluid He at 1.9 K and 1 bar, the operational condition at the LHC. This has involved extensive modification of the 4.5 K cryogenics plant, including piping, compressors, and other upgraded components; a new vertical test cryostat which can accept larger diameter magnets; a modern-ized power supply system upgraded with IGBT switches and fast shutoff capability, and that can supply 24 kA to test high field Nb$_\mathbf{3}$Sn magnets; and completely new data acquisition, signal analysis, and control software and hardware, allowing for fast, high precision, large volume data collection. This paper reports on the design, assembly, and commissioning of this upgraded test facility, and presents results of the first magnet test performed.

20 May 2020 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
RDR. C. Duckworth
R. C. Duckworth
EBE. E. Burkhardt
E. E. Burkhardt
ALA. Lumsdaine
A. Lumsdaine
JRJ. Rapp
J. Rapp
WHW. R. Hicks
W. R. Hicks
JDJ. A. Demko
J. A. Demko
An important step toward the advent of nuclear fusion as a future power source is the development of plasma-facing materials that can function as designed for a long period of time. While ITER and other devices including Wendelstein 7-X and the Joint European Torus will provide insight into divertor and first wall performance, a dedicated device to advance the understanding of material performance in the representative plasma environments is needed. The Material Plasma Exposure eXperiment has been proposed as a linear plasma device to generate and to direct fusion reactor-like plasma energy and particle flux at the target materials with electron temperatures of 1-15 eV and electron densities of 10²⁰-10²¹ m⁻³. Given that the requirements for radio frequency (RF) heating on-axis field are no greater than 2.5 T and the warm bore diameters must be between 60 cm and 1.5 m, the conceptual design was developed for the experiments on a set of superconducting magnets carried out using commercially available NbTi superconductors. This conceptual design evaluated the cryogenic heat loads, mechanical loads, and quench protection to ensure that the current design is compatible with current technologies. In addition, an alternative evaluation of this design relative to ReBCO high-temperature superconducting magnets determined the conditions under which these technologies could be advantageous.

20 December 2019 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
RGRamesh Gupta
Ramesh Gupta
KAKathleen Amm
Kathleen Amm
MAMichael Anerella
Michael Anerella
JCJohn Cozzolino
John Cozzolino
PJPiyush Joshi
Piyush Joshi
CCC. Cozzolino
C. Cozzolino
This paper presents a new approach for developing and demonstrating high field magnet technology based on a magnet and test facility developed specifically for it. The traditional ap-proach for carrying out high field magnet R&D has been building a new magnet to demonstrate a new design, new material or new tech-nology. However, building a high field magnet is time consuming and expensive. To overcome this limitation, Brookhaven National Laboratory (BNL) built and successfully tested a 10 T $\text{Nb}_3 \text{Sn}$ dipole DCC017 with large enough open or clear space (31 mm wide and 338 mm high) so that a pair of racetrack coils could be inserted into this opening without disassembling the magnet. The motivation be-hind this design was to facilitate a magnet R&D program where the new coils (with a large range in width and height accommodated) would reside in a high field region in direct contact with the existing coils (just as other magnet coils) and thus become an integral part of the magnet. We summarize the approach, the magnet, the test facil-ity, past experiences, current and future test plans and planned up-grade. The magnet facility is now available to service the needs of the wider community for testing cable and insert coils in a back-ground field of up to 10 T.