27 March 2024 in Robotica
Aiming at the problems of small good workspace, many singular configurations, and limited carrying capacity of non-redundant parallel mechanisms, a full-redundant drive parallel mechanism is designed and developed, and its performance evaluation, good workspace identification, and scale optimization design are studied. First, the kinematics analysis of the planar 6R parallel mechanism is completed. Then, the motion/force transmission performance evaluation index of the mechanism is established, and the singularity analysis of the mechanism is completed. Based on this, the fully redundant driving mode of the mechanism is determined, and the good transmission workspace of the mechanism in this mode is identified. Then, the mapping relationship between the performance and scale of the mechanism is established by using the space model theory, and the scale optimization of the mechanism is completed. Finally, the robot prototype is made according to the optimal scale, and the performance verification is carried out based on the research of dynamics and control strategy. The results show that the fully redundant actuation parallel mechanism obtained by design optimization has high precision and large bearing capacity. The position repeatability and position accuracy are 0.053 mm and 0.635 mm, respectively, and the load weight ratio can reach 15.83%. The research results of this paper complement and improve the performance evaluation and scale optimization system of redundantly actuated parallel mechanisms.
1 December 2014 in Advances in Mechanical Engineering
Improving the load-to-weight ratio of robots is an essential issue in the field of construction robots. In the present study, a method for analyzing the mobility of the typical multi-loop coupled mechanism is proposed, which combines the iterative replacement of generalized kinematic pairs with the screw theory. Then, the driving force/torque, driving power, and total power of actuators are considered as the evaluation indices, and the influence of different drive layouts on the mechanism is analyzed. Obtained results show that the driving force of the moving pair in the drive layout S1 or S3 changes smoothly compared with that in the drive layout S2, and the peak values of the driving force and the driving torque reduce by 49% and 12%, respectively. This demonstrates that the drive layout S1 effectively reduces the quality of the actuators. Finally, the coupled mechanism with the drive layout is applied in a high-altitude curtain wall installation robot, and the prototype of the robot is developed based on the coupled mechanism. Performed experiments show that the load-to-weight ratio in the proposed robot is about 13%.
1 February 2024 in Journal of Mechanisms and Robotics
Aiming at the inherent defects of single-drive mode parallel mechanisms, such as small good workspace and many singular configurations, a new multi-drive mode parallel mechanism is proposed from the perspective of driving innovation. Taking the planar 6R parallel mechanism as an example, the driving layout configuration strategy and scale optimization design are studied. First, the potential driving layout of the mechanism is analyzed, and the inverse kinematics model of the mechanism is established. Then, based on the motion/force transmission index, the singular space and good transmission workspace of the mechanism are identified, and the mechanism-driven layout configuration strategy is formulated to complete the performance comparison analysis. Finally, based on the performance map method, the scale optimization design of the mechanism is carried out, the prototype is developed and manufactured, and the experimental verification is carried out. The research results show that the multi-drive mode parallel mechanism can improve its kinematic performance without changing the topological structure and scale parameters of the mechanism.