An autonomous underwater vehicle (AUV) is used for exploring marine resources and monitoring infrastructure facilities. Because an AUV is powered by batteries, it needs to be lifted out of the water to have them replaced or recharged. Thus, wirelessly feeding power to an AUV under the sea would improve the efficiency of marine activities. However, it is difficult to wirelessly power an object under the sea because seawater has high conductivity. We examine the electromagnetic field in lossy materials such as a conductor, a coil cover, and seawater. We design a wireless magnetic resonance-based power transfer system with multiple coils using bandpass filter (BPF) theory. The coil structure is sealed so that water cannot enter it. We perform experiments on this system completely immersed in seawater and measure the coil coupling coefficient, efficiency, and wattage. The results confirm wireless power transfer exceeding a distance of 10 m in an undersea setting. We verify the transmission efficiency by changing the receiving-coil position on the central axis of the transfer coils. Furthermore, we confirm a dependence on transfer on the order of 1 to 100 W.
1 February 2022 in IEEE Transactions on Microwave Theory and Techniques
Recently, microwave power transfer (MPT) for Internet-of-Things (IoT) devices has been actively studied. The distributed microwave power transfer (DMPT) can supply power efficiently by cooperating multiple transmit antenna arranged distributed in a relatively wide area. In this article, the advantages of DMPT are shown by using ray-trace-based Monte Carlo simulation. In addition, an algorithm for optimizing the phase is proposed and discussed its convergence. Furthermore, the implementation of DMPT using a backscatter-based closed-loop system is proposed. The system was built using the open-source platform GNU Radio. Experimental results show the effectiveness of the proposed system.
A built-in folded monopole antenna for handsets (BFMA) is introduced and investigated. The characteristics of the BFMA are compared with those of a planar inverted-F antenna (PIFA), which is one of the conventional handset antennas. As a result, it has been confirmed that the BFMA has smaller size and wider bandwidth compared with the PIFA.
9 September 2003 in Electronics and Communications in Japan (Part I: Communications)
In a system that feeds relatively small electric power using microwaves, it is a problem to improve received power in various arrival directions in a power receiving device that is generally small. In this paper, we propose a rectenna that converts power in a wide range of incoming direction to DC with an array antenna that performs power synthesis by a hybrid circuit and report the results of verification by simulation and actual measurement.