3 October 2022 in Journal of Environmental Management
Atmospheric particulate matter (PM) has a significant threat not only to human health but also to our environment. In Hungary, 54% of PM10 comes from residential combustion, which also includes the practice of household waste burning. Therefore, this work aims to investigate the quality of combustion through the flue gas concentrations (CO, CO2, O2) and to identify and evaluate the negative impacts of PM and PAHs generated during controlled lab-scale combustion of different mixed wastes (cardboard and glossy paper, polypropylene and polyethylene terephthalate, polyester and cotton). Mixed wastes were burnt in a lab-scale tubular furnace at different temperatures with 180 dm3/h air flow rate. Chemical analyses were coupled with ecotoxicological tests using the bioluminescent bacterium Vibrio fischeri. Ecotoxicity was expressed as toxic unit (TU) values, toxic equivalent factors (TEF) were also presented. During the combustion same amount of O2 enters the reaction, but a different amount CO2 is generated due to the C content of the sample. The waste with highest C-content related to the highest CO2 emission. Increasing the combustion temperature produces more PM-bound PAHs, which remains the same composition in the case of plastic and textile groups. The TU of solid contaminants decreases with increasing combustion temperature and increases with the minerals which are left behind in the water from the solid contaminants.
19 July 2025 in Journal of Environmental Chemical Engineering
25 February 2026 in Journal of Hazardous Materials
ACAnikó Jordán Csábrádiné
+4
The formation of polycyclic aromatic hydrocarbons (PAHs) during polyurethane foam (PUF) combustion poses major environmental and health concerns. Yet, the roles of inorganic additives and thermal ageing in PAH emissions remain poorly understood. This study systematically investigated the influence of inorganic additives (CaCO3 and CaCl2, at 5% and 10% w/w) and thermal ageing on PAH emissions across a temperature range of 650-900 °C. Flexible PUFs were synthesized under controlled conditions, subjected to standard ageing protocols, and combusted in an electrically heated tube furnace. The particle-bound PAHs were collected on quartz filters and then quantified by gas chromatography coupled with mass selective detection (GC-MS). Statistical analyses (three-way ANOVA and Tukey's HSD) were performed to evaluate the main and interaction effects of ageing, additive concentration, and combustion temperature. The results demonstrate that temperature is the dominant factor, with PAH emissions rising sharply above 850 °C, particularly in aged foams. Ageing consistently promoted the formation of heavier PAHs, consistent with structural degradation of the polymer facilitating aromatic growth. Inorganic additives exhibited distinct and compound-specific influences on PAH emissions. CaCO3 had only low, mostly suppressing effects in the case of non-aged foams, while CaCl2 showed a dual role, promoting PAHs at 750-850 °C but suppressing them at 900 °C. These results highlight the contrasting mechanistic roles of carbonate and chloride additives in controlling aromatic growth pathways. These findings provide mechanistic insights that can inform safer PUF design and guide emission control strategies in waste management.