1 August 2016 in International Journal of Biological Macromolecules
2 October 2013 in Critical Reviews in Food Science and Nutrition
Most materials currently used for food packaging are nondegradable, generating environmental problems. Several biopolymers have been exploited to develop materials for ecofriendly food packaging. However, the use of biopolymers has been limited because of their usually poor mechanical and barrier properties, which may be improved by adding reinforcing compounds (fillers), forming composites. Most reinforced materials present poor matrix–filler interactions, which tend to improve with decreasing filler dimensions. The use of fillers with at least one nanoscale dimension (nanoparticles) produces nanocomposites. Nanoparticles have proportionally larger surface area than their microscale counterparts, which favors the filler–matrix interactions and the performance of the resulting material. Besides nanoreinforcements, nanoparticles can have other functions when added to a polymer, such as antimicrobial activity, etc. in this review paper, the structure and properties of main kinds of nanostructured materials which have been studied to use as nanofiller in biopolymer matrices are overviewed, as well as their effects and applications.
5 December 2013 in International Journal of Food Engineering
A novel glycerol-plasticized and citric acid (CA)-modified starch/carboxymethyl cellulose (CMC)/montmorillonite (MMT) bionanocomposite films were prepared from corn starch by casting, to study the effect of the 10% CA, 10% CMC and four different loadings of MMT on the properties of starch films. Atomic force microscopy surface analysis showed that starch/CMC/MMT films had the highest roughness. X-ray diffraction test showed that the clay nanolayers formed an intercalated structure in the bionanocomposites. However, completely exfoliated structure formed only in the pure starch/MMT nanocomposites (without CA and CMC). CA, CMC and MMT improved mechanical properties of starch films. MMT had the greatest effect on the mechanical properties. The MMT addition at content of 7% caused to increase in ultimate tensile strength by more than threefold in comparison to modified starch/CMC films. The water vapor permeability (WVP) decreased significantly ( p < 0.05) by the addition of CA and CMC. When the MMT content of the starch films reached to 7%, the WVP decreased about 75% in comparison to the neat starch film. However, the hydrophilic character of bionanocomposites increased as the increasing of MMT content.
1 July 2018 in Carbohydrate Polymers
1 October 2018 in International Journal of Biological Macromolecules
SRSeyed Mohammad Ali Razavi
Seyed Mohammad Ali Razavi