Staffan Norrga

Staffan Norrga

Auto-generated profile, based on publicly available information

Staffan Norrga

Department of Electric Power and Energy Systems, KTH Royal Institute of Technology, Stockholm, Sweden

Research Focus & Metrics

Academic Career Length

25Years (2002-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 April 2012 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
LHLennart Harnefors
Lennart Harnefors
AAAntonios Antonopoulos
Antonios Antonopoulos
SNStaffan Norrga
Staffan Norrga
LALennart Angquist
Lennart Angquist
HNHans-Peter Nee
Hans-Peter Nee
Theory for the dynamics of modular multilevel converters is developed in this paper. It is shown that the sum capacitor voltage in each arm often can be considered instead of the individual capacitor voltages, thereby significantly reducing the complexity of the system model. Two selections of the so-called insertion indices, which both compensate for the sum-capacitor-voltage ripples, are considered. The dynamic systems which respectively result from these selections are analyzed. An effective dc-bus model, which takes into account the contribution from the submodule capacitors, is obtained. Finally, explicit formulas for the stationary sum-capacitor-voltage ripples are derived.

16 June 2011 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KIKalle Ilves
Kalle Ilves
AAAntonios Antonopoulos
Antonios Antonopoulos
SNStaffan Norrga
Staffan Norrga
HNHans-Peter Nee
Hans-Peter Nee
The fundamental frequency component in the arm currents of a modular multilevel converter is a necessity for the operation of the converter, as is the connection and bypassing of the submodules. Inevitably, this will cause alternating components in the capacitor voltages. This paper investigates how the arm currents and capacitor voltages interact when the submodules are connected and bypassed in a sinusoidal manner. Equations that describe the circulating current that is caused by the variations in the total inserted voltage are derived. Resonant frequencies are identified and the resonant behaviour is verified by experimental results. It is also found that the effective values of the arm resistance and submodule capacitances can be extracted from the measurements by least square fitting of the analytical expressions to the measured values. Finally, the analytical expression for the arm currents is verified by experimental results.

1 January 2014 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KIKalle Ilves
Kalle Ilves
SNStaffan Norrga
Staffan Norrga
LHLennart Harnefors
Lennart Harnefors
HNHans-Peter Nee
Hans-Peter Nee
The modular multilevel converter is a promising topology for high-voltage and high-power applications. By using submodules equipped with dc-capacitors excellent output voltage waveforms can be obtained at low switching frequencies. The rated energy storage of the submodule capacitors is a driving factor of the size, cost, and weight of the submodules. Although the modular multilevel converter has been thoroughly investigated in the literature, a more detailed analysis of the energy-storage requirements will provide an important contribution for dimensioning and analysis of modular multilevel converters. Such an analysis is presented in this paper. The analysis relates the power transfer capability to the stored energy in the converter and the findings are validated by both simulations and experimental results. The required size of the submodule capacitors in a 4.5 MW grid-connected converter is first calculated and the calculated operating range is then compared with simulation results. The experimental results show that if the average capacitor voltage is allowed to increase 10% above the nominal value an energy storage to power transfer ratio of 21 J/kW can be achieved. It is concluded that the presented theory can relate the power transfer capability to the energy storage in the converter and is thus a valuable tool in the design and analysis of modular multilevel converters.

17 October 2013 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
AAAntonios Antonopoulos
Antonios Antonopoulos
LALennart Angquist
Lennart Angquist
SNStaffan Norrga
Staffan Norrga
KIKalle Ilves
Kalle Ilves
LHLennart Harnefors
Lennart Harnefors
HNHans-Peter Nee
Hans-Peter Nee
Modular multilevel converters are shown to have a great potential in the area of medium-voltage drives. Low-distortion output quantities combined with low average switching frequencies for the semiconductor devices create an ideal combination for very high-efficiency drives. However, the large number of devices and capacitors that have to conduct the fundamental-frequency current require more complex converter control techniques than its two-level counterpart. Special care needs to be taken for starting and operation at low speeds, where the low-frequency current may cause significant unbalance between the submodule capacitor voltages and disturb the output waveforms. In this paper, principles for converter operation with high torque in the whole speed range are investigated. Experimental results from a down-scaled 12-kVA prototype converter running a loaded motor at various speeds between standstill and the rated speed are also provided.

24 January 2012 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KIKalle Ilves
Kalle Ilves
AAAntonios Antonopoulos
Antonios Antonopoulos
SNStaffan Norrga
Staffan Norrga
HNHans-Peter Nee
Hans-Peter Nee
This paper presents a new modulation method for the modular multilevel converter. The proposed method is based on a fixed pulse pattern where harmonic elimination methods can be applied. In the proposed modulation method, the pulse pattern is chosen in such a way that the stored energy in each submodule remains stable. It is shown that this can be done at the fundamental switching frequency without measuring the capacitor voltages or using any other form of feedback control. Such a modulation scheme has not been presented before. The theoretical results are verified by both simulations and experimental results. The simulation results show successful operation at the fundamental switching frequency with a larger number of submodules. When a smaller number of submodules are used, harmonic elimination methods may be applied. This is verified experimentally on a converter with eight submodules per phase leg. The experimental results verify that stable operation can be maintained at the fundamental switching frequency while successfully eliminating the fifth harmonic in the ac-side voltage.

29 April 2014 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KIKalle Ilves
Kalle Ilves
LHLennart Harnefors
Lennart Harnefors
SNStaffan Norrga
Staffan Norrga
HNHans-Peter Nee
Hans-Peter Nee
Many publications have been presented on the modulation and control of the modular multilevel converter, some of which are based on phase-shifted carrier modulation. This paper presents an analysis of how the switching frequency affects the capacitor voltages, circulating currents, and alternating voltages using phase-shifted carrier modulation. It is found that switching frequencies that are integer multiples of the fundamental frequency should be avoided as they can cause the capacitor voltages to diverge. Suitable switching frequencies are derived for which the arm and line quantities will be periodic with symmetric operating conditions in the upper and lower arms. Thus, the practical outcome of this paper is a detailed description of how the switching frequency should be chosen in order to achieve advantageous operating conditions. The theoretical results from the analysis are validated by both simulations and experimental results.