Contactless Human to Machine Interface (HMI) is an indispensable technology for handling the machine or equipment in a pandemic situation where the virus can spread through direct contact. The contactless hand gesture sensor is an essential part needed for the HMI system as previously mentioned. Several hand gestures with a similar Doppler response will become problems in applying Doppler radar as a hand gesture sensor that requires a more complex recognition method. This paper proposes spatial diversity implementation for obtaining more accurate hand gesture features to cope with this problem. Array radar was selected as a sensor configuration to create the spatial diversity feature. In this paper, an array configuration of four Continuous Wave (CW) radars is proposed as a contactless sensor for hand gestures. Peak detection based on cross-correlation was employed to determine the time position of the hand gesture Doppler response detected by each CW radar. The time position pattern then becomes a feature of each hand gesture used. The CW radar array is realized with an operating frequency of 10 GHz by using the HB 100 as a CW radar component. The experimental results show that the proposed method can distinguish the hand gesture feature with an accuracy of 96.6 % at a sensing distance of 50 cm. It can differentiate the hand gesture pairs that have the opposite direction movement with a similar Doppler effect, and also requires simple data processing for recognizing different hand gestures.
Recent developments in high-performance Software Defined Radios (SDR) and their utilization in CubeSat payloads are transforming Earth Observation (EO), including Microwave Radiometers, Global Navigation and Satellite System – Radio Occultations (GNSS-RO), and – Reflectometry (GNSS-R). In recent years, GNSS-R has been increasingly used in land and marine environmental monitoring, with applications expanding to other emerging fields in EO. The so called Delay Doppler Map (DDM) is the primary observable of GNSS-R receivers, providing information on surface properties, i.e. dielectric constant and surface roughness. Efficient on-board processing is essential in CubeSat-based GNSS-R missions, due to the large volume of raw data and the constraints of limited downlink bandwidth. However, limited on-board computational resources present challenges, as DDM generation requires intensive Fast Fourier Transform (FFT) operations. This study presents the design and development of a cost-effective and compact 0.5U GNSS-R CubeSat payload that optimizes the GNSS-R data processing technique by using the auxiliary data from the reference signals, such as Pseudo-Random Noise (PRN) codes, and their Doppler frequencies in order to reduce the search space. This way the payload selectively processes the raw data, significantly reducing the computational load. The payload processing unit is implemented in Analog Devices ADRV9364 with a dual-core ARM Cortex-A9 processor with a Zynq-7000 FPGA.
Active microwave remote sensing at P-band offers the potential to map vegetation biomass and subsurface soil moisture. This paper presents the development of a novel Software-Defined Radio (SDR)-based Pseudo-Random Noise (PRN) radar operating at P-band. Utilizing GNU Radio, it is the first one of its kind performing real-time range compression and coherent integration, achieving a signal-to-noise ratio (SNR) of up to 64.4 dB. Operating at a low transmit power of 10 dBm, experimental results validate the system’s performance, demonstrating its potential for remote sensing applications.
23 June 2025 in IEEE Geoscience and Remote Sensing Letters
The fundamental observable in Global Navigation Satellite System Reflectometry (GNSS-R) is the so-called Delay-Doppler Map (DDM), which is derived from the cross-correlation of the reflected signal with either the direct signal or a locally generated replica of the transmitted signal as implemented in our algorithm. Efficient coherent integration is essential for enhancing the signal-to-noise ratio (SNR) and improving the quality of the retrieved data products. This work investigates the limitations of coherent integration in conventional GNSS-R (cGNSS-R) and proposes a novel blind compensation technique to extend integration time by mitigating phase differences caused by navigation bit changes and propagation effects. The maximum length of coherent integration depends on the application; however, achieving a higher SNR within the same integration time enhances the quality of DDMs. Simulation results obtained from high-dynamic synthetic data demonstrate the effectiveness of the proposed technique. Additionally, real data from the UK-DMC reflectometry mission is used to validate the approach.
17 December 2025 in IEEE Geoscience and Remote Sensing Magazine