We propose and demonstrate a novel and compact optical-fiber temperature sensor with a high sensitivity and high figure of merit (FOM) based on surface plasmon resonance (SPR). The sensor is fabricated by employing a single-mode twin-core fiber (TCF), which is polished as a circular truncated cone and coated with a layer of gold film and a layer of polydimethylsiloxane (PDMS). Owing to the high refractive index sensitivity of SPR sensors and high thermo-optic coefficient of PDMS, the sensor realizes a high temperature sensitivity of to in the range from 20°C to 70°C, transcending most other types of optical-fiber temperature sensors. Owing to the fundamental mode beam transmitting in the TCF, the sensor realizes a high FOM of up to 0.034/°C, more than twice that of SPR sensors based on multimode fiber. The proposed temperature sensor is meaningful and will have potential applications in many fields, such as biomedical and biomaterial.
We propose and demonstrate a novel and compact optical fiber surface plasmon resonance (SPR) sensor for the simultaneous measurement of the refractive index (RI) and temperature. The sensor is fabricated by employing the eccentric-core fiber (ECF), which is polished to a V-shaped micro-structure optical fiber (MOF). One side of the MOF is used as the RI sensing channel, and the other side is used as the temperature sensing channel. Two sensing channels are independent without crosstalk. The sensor has high RI sensitivity up to the maximum of 3376 nm/RIU from 1.333 to 1.385 RIU, and high-temperature sensitivity up to from 20°C to 60°C. In addition, owing to the few-mode light in the ECF, the full width at half-maximum is smaller than other SPR sensors based on multimode fiber. This sensor will be extremely helpful to improve the RI measurement uncertainty caused by temperature disturbance.
We propose and demonstrate a novel optical-fiber micro-displacement sensor based on surface plasmon resonance (SPR) by fabricating a Kretschmann configuration on graded-index multimode fiber (GIMMF). We employ a single-mode fiber to change the radial position of the incident beam as the displacement. In the GIMMF, the angle between the light beam and fiber axis, which is closely related to the resonance angle, is changed by the displacement; thus, the resonance wavelength of the fiber SPR shifts. This micro-displacement fiber sensor has a wide detection range of 0–25 μm, a high sensitivity with maximum up to 10.32 nm/μm, and a nanometer resolution with minimum to 2 nm, which transcends almost all of other optical-fiber micro-displacement sensors. In addition, we also research that increasing the fiber polishing angle or medium refractive index can improve the sensitivity. This micro-displacement sensor will have a great significance in many industrial applications and provide a neoteric, rapid, and accurate optical measurement method in micro-displacement.
We demonstrate trapped yeast cell axial-position adjustment without moving the optical fiber in a single-fiber optical trapping system. The dynamic axial-position adjustment is realized by controlling the power ratio of the fundamental mode beam () and the low-order mode beam () generated in a normal single-core fiber. In order to separate the trapping positions produced by the two mode beams, we fabricate a special fiber tapered tip with a selective two-step method. A yeast cell of 6 μm diameter is moved along the optical axis direction for a distance of . To the best of our knowledge, this is the first demonstration of the trapping position adjustment without moving the fiber for single-fiber optical tweezers. The excitation and utilization of multimode beams in a single fiber constitutes a new development for single-fiber optical trapping and makes possible more practical applications in biomedical research fields.
We proposed and experimentally demonstrated 3-dimensional dark traps for low refractive index bio-cells using a single optical fiber Bessel beam. The Bessel beam was produced by concatenating single-mode fiber and a step index multimode fiber, which was then focused by a high refractive index glass microsphere integrated on the fiber end facet. The focused Bessel beam provided two dark fields along the axial direction, where stable trapping of low refractive index bio-cells was realized in a high refractive index liquid bath. The all-fiber and seamlessly integrated structure of the proposed scheme can find ample potential as a micro-optical probe in in situ characterization and manipulation of multiple bio-cells with refractive indices lower than that of the liquid bath.