In Latin America and the Caribbean, the consumption of energy, that comes mainly from fossil resources, have carried an increase in the air pollution. Electricity generation and its consumption in residential sector contributes to this problem with a significant percentage. On the other hand, recent research has demonstrated that the use of smart energy meters in developed countries reduces the electricity consumption due the continuous feedback gave to the consumer. This research presents the developing and implementation of an electrical energy consumption monitoring system based on smart sensors with IoT technology. The system calculates the instant power and the electrical efficiency as well as the energy consumed and its cost. The information of these variables is processed and transferred trough a WIFI ESP8266 module to a ThingSpeak server that works like a cloud database. Also, an Android mobile application that interacts directly with the database was developed to users visualize the variables behavior. For validate the smart sensor accuracy its measures were compared with the measures of an oscilloscope and a multimeter. Relative errors between -2.34 and 1.92 % were observed.
Microgrids have increased in popularity thanks to both the integration of renewable energy resources and their energy distribution capability for remote locations. Moreover, the microgrids, mainly using multiple generators connected in parallel, acquire additional advantages by using both Hot-Swap and Current-Sharing techniques. This paper presents the development of a Hardware in the Loop platform to test Current-Sharing algorithms. It is reinforced that the use of a real-time simulation based on Hardware in the Loop is a viable and cost-effective alternative in the validation of controllers. The platform was developed in a graphical programming environment (LabVIEW 2015) and implemented with NI MyRIO 1900 (National Instruments Corp., Austin, TX, USA) development boards for easier reproducibility. The entire code project is openly available and provided in this paper. A system of photovoltaic energy generators was used to evaluate the performance of the HIL platform. As a result, the platform was able to reproduce a similar behavior to the photovoltaic generator, presenting average mean errors of 0.4 V and 0.2 A in its voltage and current, respectively. Additionally, the platform showed its capability to test Current-Sharing algorithms in the occurrence of Hot-Swap events. This work contributes with a validation tool for energy management systems applied to microgrids.
19 January 2024 in Entreciencias: Diálogos en la Sociedad del Conocimiento
Understanding the dynamic properties of 3D-printed materials subjected to high strain rates enables designers and engineers to obtain engineering data for designing components subjected to dynamic loads. The work of Chili et al., presented in 2023, is the most recent research that evaluates the properties of carbon fiber-reinforced polyethylene terephthalate glycol (CF-PETG) using the Split Hopkinson Pressure Bar (SHPB) test. A detailed analysis and discussion of the results presented in the analyzed document are provided. Finally, the areas for improvement in the research are highlighted to achieve better results.