15 November 2024 in IEEE Transactions on Transportation Electrification
A conventional sensorless control method based on sliding mode observer (SMO) and type-2 phase-locked loop (PLL) is widely applied in permanent magnet synchronous motor (PMSM) drives due to its simplicity and effectiveness. However, the conventional method is easily affected by factors, such as parameter mismatch and dc bias, making it challenging to achieve satisfactory performance. Therefore, in this article, the conventional method is first accurately modeled to explore the mechanisms of position error generation from the switching function, PLL, and parameter mismatch. Subsequently, a general position error correction method is proposed based on a robust extended state observer (RESO) integrated with a simple inductance estimation method. The proposed RESO not only effectively eliminates various position errors, but also improves dynamic performance and enhances robustness. Finally, the effectiveness of the proposed method is validated through experimental comparisons with other methods on a 1.5-kW PMSM platform.
27 March 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
To reduce the harmonic distortion in sensorless control of permanent magnet synchronous motor (PMSM), the phase-locked loop (PLL) with frequency-adaptive filter has been widely employed. However, the issue of frequency coupling within the PLL is often overlooked. Through precise modeling of the PLL with frequency-adaptive filter, this paper reveals that such frequency coupling leads to PLL stability degradation and bandwidth limitation. To address this issue, a frequency-decoupled complex coefficient filter (FDF) is proposed, effectively eliminating frequency coupling within the PLL. Furthermore, building upon the FDF, a low computational burden robust hybrid complex coefficient filter (RHF) is developed using a cross-feedback network to overcome the contradiction between high dynamic performance and strong harmonic suppression in the filter. Consequently, the RHF enhances harmonic suppression without sacrificing dynamic performance, thereby improving the accuracy of position estimation and dynamic performance in sensorless control. Finally, the effectiveness of the proposed method is verified by experimental comparison with other methods on a 1.5 kW PMSM platform.
26 May 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The sensorless control method based on back electromotive force (BEMF) observers has garnered significant attention in the field of medium- to high-speed permanent magnet synchronous motor (PMSM) drives. However, traditional BEMF observers, due to their low-pass characteristics, struggle to handle DC errors caused by factors such as measurement inaccuracies and inverter nonlinearity, leading to degraded sensorless control performance. Moreover, some advanced methods are constrained by specific design frameworks, resulting in complex observer structures that are not conducive to practical implementation. Therefore, in this paper, a simple and flexible inverse design method for the observer based on a generalized BEMF observer model is first proposed. Subsequently, the method is employed with the gradient descent algorithm to develop a frequency-adaptive observer (FAO), which can completely eliminate DC errors. The proposed observer exhibits zero phase lag and amplitude attenuation at the fundamental frequency of the PMSM, with the fundamental frequency information provided by the frequency-adaptive rule. Compared to other observers, the proposed observer has a simpler structure and is easier to implement. Furthermore, a small-signal model of the FAO is established through linearization to facilitate parameter tuning, and its stability is analyzed based on Lyapunov theory. Finally, comparative experiments are conducted on a 1.5 kW PMSM platform, where the proposed FAO is compared with other observers, validating its effectiveness and feasibility.
10 March 2026 in IEEE Transactions on Industrial Electronics
Tracking errors arise when proportional–integral (PI)-based current control with traditional pole-zero cancellation is applied to permanent magnet synchronous motors (PMSMs) with low inertia, which has remained underexplored. Therefore, an in-depth analysis is conducted in this article and reveals the incomplete effectiveness of feedforward and active damping used in traditional pole-zero cancellation control for back electromotive force (BEMF) compensation in low-inertia PMSMs. To resolve these issues, a second-order model for PMSMs is developed to reveal the essential influence of inertia on current. Based on this model, a speed-independent current control (SICC) strategy is proposed in the discrete-time domain. Adopting the novel inertia-robust pole-zero cancellation, the SICC method combines error controller and BEMF compensation, which is capable of handling conjugate poles of the PMSM model and achieves the double-integrator performance, whereas traditional pole-zero cancellation in PI-based methods cannot. In addition, direct discrete design is proposed to obtain better dynamic performance for low-switching frequencies compared with continuous design, to accommodate different scenarios of PMSMs with low inertia. Finally, experimental comparisons on a 750 W PMSM platform validate the effectiveness of the proposed SICC approach.