We have developed a watt-level random laser at 532 nm. The laser is based on a 1064 nm random distributed ytterbium (Yb) gain-assisted fiber laser seed with a 0.35 nm linewidth and 900 mW polarized output power. A study for the optimal length of the random distributed mirror was carried out. A Yb-doped fiber master oscillator power amplifier architecture is used to amplify the random seeder laser without additional spectral broadening up to 20 W. By using a periodically poled lithium niobate crystal in a single-pass configuration, we generate in excess of 1 W random laser at 532 nm by second-harmonic generation (SHG) with an efficiency of 9%. The green random laser exhibits an instability , an optical signal-to-noise ratio , a 0.1 nm linewidth, and excellent beam quality.
Motivated by significant research efforts focused on overcoming technological challenges, fiber-based lasers are very convincing choices for numerous applications requiring high-power, low-noise laser light [1,2]. Using a master oscillator power amplifier (MOPA) architecture, it is also possible to achieve single-frequency (SF) operation at high power.
Summary form only given. Low intensity noise laser sources are a fundamental prerequisite for demanding fundamental research such as interferometric gravitational-wave detection (GWD) [1], precision spectroscopy, LIDAR, and ultra-cold atom/molecular optical lattices. Besides, high power lasers with low intensity noise also attract great interest in the industry applications. Direct pump current control is the simplest method to suppress the laser intensity noise. However, the modulation of high current multi-mode pump diodes is not straightforward and achieving wide feedback control bandwidth beyond 200 kHz is challenging. For the laser sources used in GWD, the intensity noise could be suppressed down to -140 dBc/Hz (1 kHz-10 kHz) for an output power of 160 W. However, this approach requires a quite complex setup and the feedback bandwidth is limited to ~10 kHz [1].