3 August 2018 in Science Advances
Dielectric cavities support record low mode volumes by incorporating subwavelength features into photonic crystal unit cells.
11 November 2020 in Optics Letters
A beam shaping approach has been implemented to realize high-performance waveguide crossings based on cosine tapers. Devices with a compact footprint of were fabricated on the GLOBALFOUNDRIES 45 nm monolithic silicon photonics platform (45 CLO technology). Fabricated devices are found to be nearly wavelength independent ( for ) with low insertion loss ( ) and crosstalk ( ). The measured response of the devices is consistent with the three-dimensional finite-difference time-domain simulation results. The design stability is validated by measuring the device insertion loss on eight chips, which is found to be at the designed center wavelength of 1310 nm.
29 August 2018 in Optics Letters
Side-coupled photonic crystal (PhC) nanobeam cavities were investigated to overcome challenges in measuring low-order resonances in traditional in-line PhC nanobeams that arise due to the trade-off between achieving high quality ()-factor and high transmission intensity resonances. On the same PhC nanobeam, we demonstrate that the side-coupling approach leads to measurable resonances even in cases in which high mirror strength unit cells severely limit the intensity of transmitted light through the in-line configuration. In addition, by coupling light directly into the cavity center, the design of side-coupled PhC nanobeams can be simplified such that high -factor PhC nanobeams can be achieved using only two different hole radii and uniform hole spacing.
26 January 2022 in Optics Letters
Here we report a photonic crystal with a split ring unit cell shape that demonstrates an order of magnitude larger peak electric field energy density compared with that of a traditional photonic crystal. Split ring photonic crystals possess several subwavelength tuning parameters, including split ring rotation angle and split width, which can be leveraged to modify light confinement for specific applications. Modifying the split ring’s parameters allows for tuning of the peak electric field energy density in the split by over one order of magnitude and tuning of the air band edge wavelength by nearly 10 nm in the near infrared region. Designed to have highly focused optical energy in an accessible subwavelength gap, the split ring photonic crystal is well suited for applications including optical biosensing, optical trapping, and enhanced emission from a quantum dot or other nanoscale emitter that could be incorporated in the split.
20 October 2020 in Journal of the Optical Society of America B
We report simulations and experimental measurement of a photonic crystal (PhC) designed with different unit cell geometries in a single device. This “mix-and-match” approach enables enhanced mode manipulation by incorporating non-traditional unit cell shapes into a one-dimensional PhC nanobeam cavity. Inclusion of a bowtie-shaped unit cell in the center of a mix-and-match PhC nanobeam cavity comprised elsewhere of either circular or antislot unit cells leads to a 2 order of magnitude reduction in the mode volume of the cavity while maintaining a similar quality factor.
22 February 2022 in Optics Express
We report a design methodology for creating high-performance photonic crystals with arbitrary geometric shapes. This design approach enables the inclusion of subwavelength shapes into the photonic crystal unit cell, synergistically combining metamaterials concepts with on-chip guided-wave photonics. Accordingly, we use the term “photonic metacrystal” to describe this class of photonic structures. Photonic metacrystals exploiting three different design freedoms are demonstrated experimentally. With these additional degrees of freedom in the design space, photonic metacrystals enable added control of light-matter interactions and hold the promise of significantly increasing temporal confinement in all-dielectric metamaterials.