The nanocomposites of natural rubber (NR) and organoclay with unsaturated carbon-carbon double bonds (C1/4C) on interlayer surfaces (USMMT) are prepared by the grafting and intercalating method in latex in the presence of butyl acrylate (BA) monomer. The conversion, grafting efficiency, and grafting percentage of BA onto NR and USMMT are determined. The structure and morphology of the nanocomposites are characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmitted electron microscopy (TEM), differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), and swelling experiments. The mechanical properties of the nanocomposites are measured. The results show that graft copolymerization of BA monomer onto NR molecular chains can take place with high conversion, grafting percentage, and grafting efficiency. At the same time, BA can intercalate into the interlayer galleries of USMMT and polymerize in situ together with C1/4C bonds on the interlayer surfaces. As a result, the interlayer spacing of organoclay is increased and the interfacial combination between the silicate layers and rubber is strengthened. The results of XRD and TEM demonstrate the formation of the nanocomposites of NR-M-USMMT. The glass transition temperatures of the nanocomposites are higher than that of the NR vulcanizate. The mechanical properties of the nanocomposites are remarkably improved compared with those of the NR and NR-USMMT vulcanizate.
A series of challenges, such as abrasion sensitivity and weak adhesion, has hindered the development of superhydrophobic materials for use in emerging fields. In this work, a roughness-regenerating superhydrophobic membrane with durability and repairability characteristics was synthesized via integrating vinyl-terminated polydimethylsiloxane (V-PDMS), vinyltriethoxysilane (VTES), and silica particles (SiO2). With the optimization of the textured material, double cross-linking networks and dual-scale rough structures were established in the polymer skeleton, endowing the superhydrophobic membrane with outstanding superhydrophobicity (CA: >164°; SA: 75 cycles). More importantly, the roughness-regenerating characteristics enabled the special wettability of the damaged superhydrophobic membrane to be repaired via sanding treatment without the utilization of healing agents (>15 cycles). Interestingly, based on the underwater light-reflection of the superhydrophobic material, underwater pattern display was successfully realized on the superhydrophobic membrane, which may broaden its fields of application. Our findings certainly introduce a facile method to fabricate advanced superhydrophobic materials for use in emerging fields.