A variety of autonomous oscillations in nature such as heartbeats and some biochemical reactions have been widely studied and utilized for applications in the fields of bioscience and engineering. Here, we report a unique phenomenon of moisture-induced electrical potential oscillations on polymers, poly([2-(methacryloyloxy)ethyl] dimethyl-(3-sulfopropyl) ammonium hydroxide-co-acrylic acid), during the diffusion of water molecules. Chemical reactions are modeled by kinetic simulations while system dynamic equations and the stability matrix are analyzed to show the chaotic nature of the system which oscillates with hidden attractors to induce the autonomous surface potential oscillation. Using moisture in the ambient environment as the activation source, this self-excited chemoelectrical reaction could have broad influences and usages in surface-reaction based devices and systems. As a proof-of-concept demonstration, an energy harvester is constructed and achieved the continuous energy production for more than 15,000 seconds with an energy density of 16.8 mJ/cm2. A 2-Volts output voltage has been produced to power a liquid crystal display toward practical applications with five energy harvesters connected in series.
An electret-based mechanical antenna (EBMA), which can transmit extremely low frequency (ELF) electromagnetic signals, has the advantages of miniaturization and high transmitting efficiency, with great potential applications in air, underwater, and underground communications. To improve the charge density of the electret, which is a key factor in determining the radiation performance of an EBMA, this work proposes a fluorinated ethylene propylene/terpolymer of tetrafluoroethylene, hexafluoropropylene and vinylidene fluoride (FEP/THV) unipolar electret exhibiting negative polarity, reaching a total charge density up to −0.46 mC/m2 for each layer of electret. Long transmission distances can be achieved in sea water, soil, and air using a 3-layer-FEP/THV-based EBMA with a compact volume of 5 × 10−4 m3. As an application demonstration, binary ASCII-coded ELF information of “BUAA” is successfully transmitted with a power consumption < 5 W.
22 August 2018 in IEEE Transactions on Instrumentation and Measurement
The measurement of the distorted power-frequency electric field needs to meet some special requirements such as appropriate insulation, quick response, passive measurement, and small size. In this paper, based on the Pockels effect, an integrated optical sensor is designed and used for measuring distorted power-frequency electric field for the first time. The input-output characteristic, frequency response, and temperature characteristic of the sensor are studied. The data show that the sensor has a linear measurable range from 100 V/m to 27 kV/m, a 3-dB bandwidth from 20 Hz to 10 MHz, with good temperature stability. The developed sensor is used to measure the distorted electric field and is compared with the Narda-NBM-550 sensor. The relative errors between the measured values of these two sensors and the simulation values obtained by the finite-element method are calculated. It is noted that the relative errors of the integrated optical sensor in different positions are within 12%. However, the Narda-NBM-550 sensor performs poorly at the edges of the barrier with an error of 22%. In conclusion, the findings demonstrate that the integrated optical sensor developed in this paper is more suitable for measuring distorted power-frequency electric field than the Narda-NBM-550 sensor. Further research needs to focus on the measurement of the 3-D distorted power-frequency electric field.