1 March 2019 in Marine Pollution Bulletin
Recent technology developments have turned present-day unmanned systems into realistic alternatives to traditional marine animal survey methods. Benefits include longer survey durations, improved mission safety, mission repeatability, and reduced operational costs. We review the present status of unmanned vehicles suitable for marine animal monitoring conducted in relation to industrial offshore activities, highlighting which systems are suitable for three main monitoring types: population, mitigation, and focal animal monitoring. We describe the technical requirements for each of these monitoring types and discuss the operational aspects. The selection of a specific sensor/platform combination depends critically on the target species and its behaviour. The technical specifications of unmanned platforms and sensors also need to be selected based on the surrounding conditions of a particular offshore project, such as the area of interest, the survey requirements and operational constraints.
1 October 2016 in Environmental Research Letters
8 March 2018 in Ecosphere
Unmanned aerial vehicles (UAVs) are increasingly being recognized as potentially useful for detection of marine mammals in their natural habitats, but an important consideration is the associated uncertainties in animal detection. We present a study based on field trials using UAVs to carry out image‐based monitoring of cetaceans in two fjords in northern Norway. We conducted 12 missions to assess the effects of both environmental‐ and aircraft‐related variables on detection certainty. Images were inspected for animal presence and its associated detection certainty. Images were also assessed for potentially important covariates such as wave turbulence (sea state), luminance, and glare. Aircraft variables such as altitude, pitch, and roll were combined into a single variable—pixel size. We recorded a total of 50 humpback whales, 63 killer whales (KW), and 118 unidentified sightings. We also recorded 57 harbor porpoise sightings. None of the environmental conditions (sea state, glare, and luminance) affected the detection certainty of harbor porpoises. In contrast, increasing sea state and luminance had negative and positive effects, respectively, on the detection certainty of humpback and KW. The detection certainty was not significantly affected by pixel size for both harbor porpoises, and humpback and KW. Our results indicate that at lower altitudes, variations in aircraft position (pitch and roll) do not have a variable effect on detection certainty. Overall, this study shows the importance of measuring variability in both environmental and flight‐related variables, in order to attain unbiased estimates of detectability for UAV‐based marine mammal surveys, particularly in Arctic and sub‐Arctic regions.
24 November 2015 in Optics Express
We report a methane sensor based on an integrated Mach-Zehnder interferometer, which is cladded by a styrene-acrylonitrile film incorporating cryptophane-A. Cryptophane-A is a supramolecular compound able to selectively trap methane, and its presence in the cladding leads to a 17-fold sensitivity enhancement. Our approach, based on 3 cm-long low-loss Si3N4 rib waveguides, results in a detection limit as low as 17 ppm. This is 1–2 orders of magnitude lower than typically achieved with chip-scale low-cost sensors.
21 March 2008 in IEEE Transactions on Geoscience and Remote Sensing
In this paper, we develop a Wiener-type speckle filter that operates in the stationary wavelet domain. We denote it as the stationary wavelet-domain Wiener (SWW) speckle filter. We assume that both the speckle-free image and the speckle contribution have spatial correlations and utilize well-established models for the power density spectrum of the radar cross section to estimate the autospectra that define the filter. It turns out that the filter is independent of the wavelet-domain scale level, i.e., the filter is the same at all scale levels. The SWW filter works on nonoverlapping blocks in the wavelet domain, which are obtained by a quadtree algorithm. Due to the dyadic support of the wavelet coefficients, a natural smoothing is carried out on the boundaries between neighboring blocks, and no visual boundary effects can be observed. The SWW filter is unbiased and shows good performance in despeckling synthetic aperture radar (SAR) images. It smooths homogeneous areas while preserving textured areas and point scatterers. In contrast to most other speckle filters, the SWW filter requires the SAR data to be given in single-look complex form.
1 March 2004 in International Journal of Remote Sensing
In this paper we introduce the C-WMAP filter, a wavelet based equivalent to the classical C-MAP filter. We model speckle as additive signal- dependent noise, and propose to use the normal inverse Gaussian (NIG) distribution as a statistical model for the wavelet coefficients of both the reflectance image and the noise image. A method for estimating the parameters of the proposed statistical models is presented, and we show that the NIG distribution makes excellent fits to the distributions of the wavelet coefficients of single-look synthetic aperture radar (SAR) images. The performance of the C-WMAP filter is tested on three single-look SAR images. We find that when the filter is used in a global mode it may severely blur the image. However, when applied in a local, adaptive mode the new algorithm has excellent de-speckling performance. Visual comparisons with the C-MAP filter show that C-WMAP tends to give better de-speckling. Quantitative comparisons in homogeneous regions using both the equivalent number of looks and the log standard deviation as measures definitely show that the C-WMAP gives better speckle filtering.