Biomass as a renewable and abundantly available carbon source is a promising alternative to fossil resources for the production of chemicals and fuels. The development of biobased chemistry, along with catalyst design, has received much research attention over recent years. However, dedicated reactor concepts for the conversion of biomass and its derivatives are a relatively new research field. Continuous flow microreactors are a promising tool for process intensification, especially for reactions in multiphase systems. In this work, the potential of microreactors for the catalytic conversion of biomass derivatives to value‐added chemicals and fuels is critically reviewed. Emphases are laid on the biphasic synthesis of furans from sugars, oxidation and hydrogenation of biomass derivatives. Microreactor processing has been shown capable of improving the efficiency of many biobased reactions, due to the transport intensification and a fine control over the process. Microreactors are expected to contribute in accelerating the technological development of biomass conversion and have a promising potential for industrial application in this area.
Lignin is a promising feedstock for the replacement of conventional carbon sources for the production of chemicals and fuels. In this paper, results are reported for the depolymerisation of various residual lignins in the absence of a catalyst by utilizing ozone. Reactions were performed in a microreactor set-up ensuring high gas-liquid mass transfer rates, a low inventory of ozone and straightforward scale-up possibilities. The ozonation is demonstrated using a representative model compound (vanillin) and various lignins (pyrolytic and organosolv) dissolved in methanol (2.5 wt%). Experiments were performed under ambient conditions, at gas-liquid flow ratios ranging from 30-90 and short residence times in the order of 12-24 s. Analyses of the products after methanol removal revealed the presence of (di)carboxylic acids, methyl esters and acetals. Extensive depolymerization was achieved (i.e. up to 30% for pyrolytic lignin and 70% for organosolv lignins). Furthermore, a two-step approach in which the ozonated lignin is further hydrotreated (350 – 400 oC, 100 bar H2, 4 h, Pd/C as catalyst) showed a substantial increase in depolymerization efficiency, yielding a 2.5 fold increased monomer yield compared to a hydrotreatment step only.
The enzymatic esterification of oleic acid and 1-butanol to butyl oleate was performed in an aqueous–organic system in capillary microreactors with various inner diameters operated under slug flow. The free Rhizomucor miehei lipase in the aqueous phase was used as a catalyst and n-heptane as the organic solvent. A close to 100% yield of butyl oleate could be achieved in the microreactor made of polytetrafluoroethylene within 30 min residence time at 30 °C. The reaction rate is well described by the existing kinetic model based on a Ping Pong Bi Bi mechanism with competitive inhibition of 1-butanol. This model was extended to describe the effect of the interfacial area and aqueous-to-organic flow ratio in microreactors. By performing the reaction at low aqueous-to-organic flow ratios in hydrophilic microreactors (e.g., made of stainless steel), the enzyme turnover number could be enhanced significantly, making it promising for process intensification.
Homogeneous Co/Mn/Br catalyzed aerobic oxidation of benzyl alcohol in acetic acid to benzaldehyde was performed in polytetrafluoroethylene microreactors operated under slug flow at temperatures up to 150°C and pressures up to 5 bar. Depending on the bubble velocity and length, a wetted or dewetted slug flow was observed, characterized typically by a complete or partially wetting liquid film around the bubble body. The latter flow suffered from a limited interfacial area for mass transfer. Experiments at temperatures up to ca. 90°C were under kinetic control given no product yield difference under wetted and dewetted slug flows and were used to establish a simplified kinetic expression (first order in benzyl alcohol and zero order in oxygen). This allows to develop a mass transfer model combined with an instantaneous reaction regime that well described the experimental results at higher temperatures where mass transfer was limiting in the dewetted slug flow.