A low-insertion-loss, all-single-mode fiber, wavelength-division-multiplexing filter comprising a four-port polished coupler and a strong fiber grating is demonstrated. The device operates in a novel way by a process we call grating-frustrated directional coupling. A fiber grating, present in only one half of the coupler, frustrates the transference of power to the other half within a narrow wavelength range. The performance of a prototype device—a 1535-nm channel-dropping filter with 0.7-nm bandwidth, 70% peak transmission, and 13-dB isolation—shows great promise for wavelength-division-multiplexing and line-filtering applications.
1 December 1996 in IEEE Photonics Technology Letters
We have demonstrated a novel add/drop filter for use in wavelength-division-multiplexing (WDM) optical fiber systems based on a Bragg grating assisted mismatched coupler. The device is potentially easy to fabricate and stable, because it is not interferometric, unlike all similar devices demonstrated so far, and, therefore, does not need fine tuning of the interferometers during fabrication and does not have to maintain the balance of the interferometers during its lifetime.
Nowadays, biosensor technologies which can detect various contaminants in water quickly and cost-effectively are in great demand. Herein, we report an integrated channel waveguide-based fluorescent immunosensor with the ability to detect a maximum of 32 contaminants rapidly and simultaneously. In particular, we use waveguide tapers to improve the efficiency of excitation and collection of fluorescent signals in the presence of fluorophore photobleaching in a solid surface bioassay. Under the optimized waveguide geometry, this is the first demonstration of using such a type of waveguide immunosensor for the detection of microcystin-LR (MC-LR) in lake water. The waveguide chip was activated by (3-Mercaptopropyl) trimethoxysilane/N-(4-maleimidobutyryloxy) succinimide (MTS/GMBS) for immobilization of BSA-MC-LR conjugate, which was confirmed to have uniform monolayer distribution by atomic force microscopy. All real lake samples, even those containing MC-LR in the sub-microgram per liter range (e.g. 0.5 μg/L), could be determined by the immunosensor with recovery rates between 84% and 108%, confirming its application potential in the measurement of MC-LR in real water samples.
An integrated optical multisensor for organic pollutants has been realised, and characterised for a single analyte. The sensor exploits fluorescence immunoassay in the evanescent field of channel waveguides to enable rapid, simultaneous and high-sensitivity fluorescence detection of up to 32 pollutants in water. The chemical modification used to render the surface specific to analytes allows automatic regeneration for immediate reuse. The system has been demonstrated for the key pollutant estrone and a detection limit below 1 ng/L has been achieved.