28 November 2016 in Advances in Manufacturing
17 January 2019 in Mathematical Problems in Engineering
Spindle bearing with high rotational speed is the kernel of many rotating machines which plays massive important role in the performance of the whole machine. There are also some deficiencies of the present quasi‐dynamic mathematical models of the rolling bearing in analyzing the bearing dynamic parameters. This paper develops the 3D quasi‐dynamic model with ball’s 6‐DOF, cage’s 6‐DOF, and driving ring’s 5‐DOF under steady working stage, based on the analysis of the relative position of each component to determine the normal forces between each component and the analysis of the relative velocity of the contacting point to determine the tangential force between each component. This model can analyze the dynamic parameters, such as the spin‐to‐roll ratio of inner and outer rings, the angular velocity of rolling elements in y‐axis of the location coordinate, the normal contact force of cage pocket and ball, the cage angular velocity and ball revolution velocity, and the gyroscopic moment under different working condition. Compared with the numerical calculation results of ADORE program, the results of the proposed model are able to accurately describe the change laws of the spindle bearing parameters.
6 November 2018 in Mathematical Problems in Engineering
This paper developed a modified quasi-static model (MQSM), considering the oil film thickness between the bearing parts and the centrifugal deformation of the inner ring, and contrasting with traditional quasi-static model (TQSM), to analyze the dynamic characteristics of spindle bearing. The model was verified with the experimental results. A systematic parametric analysis was made to investigate the influence of applied load, inner ring rotation speed (ni), and the radius coefficient of groove curvature (RCR) on the contact load, contact angle, and heat generating rate. The results show that there is a smaller influence on the contact load, contact angle, and heat generation of bearing with the changes of ni and axial load () of bearing in the case of MQSM and TQSM. But the radial load () and RCR have great influence on this.
1 October 2018 in IOP Conference Series: Materials Science and Engineering
Aiming at studying the dynamic performances of herringbone-grooved gas bearings, a model is built to analysis the relationship between herringbone-grooved gas bearings parameters and its performances such as friction torque, stiffness, stamping, etc. In this model, the hydrodynamic effect of compressible fluid and the shunting effect of herringbone groove are taken into account, and the partial derivative method which based on local integral finite difference method is used to calculate the modal at the same time. The result shows that when the average gap and the length-diameter ratio are decreasing, the rotate speed and eccentricity ratio will be increasing and the hydrodynamic effect of the gas bearing will be enhanced. Increasing groove angle, decreasing width-ridge ratio or aggrandizing length-groove ratio can improve its load capacity. The parameters such as rotate speed and eccentricity ratio are the most important factors which affect the dynamic characteristics of herringbone-groove gas bearing greatly. Then the analysis method is verified through an experiment systematically. In the experiment, the moment balance method is used. The experiment result shows that the result of model is correct s and reliable.
1 July 2017 in IOP Conference Series: Materials Science and Engineering
The working performances of miniature ball bearings are obviously affected by its' geometric structure parameters. In this paper, quasi-static analysis theory is applied in the design of miniature ball bearings. Firstly, it is studied the influence of geometry structure, preload and rotating speed on the dynamic performance of bearing. Secondly, bearing dynamic characteristics are analyzed which include the bearing stiffness and Spin to roll Ratio. Lastly, the contact stress and bearing life are calculated. The results indicate that structure parameters play an importance role in bearing's dynamic performances. Miniature ball bearings which have lager ball number, bigger ball diameter and smaller inner race groove radius can get better performances while velocity and preload have great impact on the bearing life. So that parameters of miniature bearing should be chosen cautiously.