1 August 2018 in Journal of Electroanalytical Chemistry
17 November 2017 in ECS Journal of Solid State Science and Technology
In this paper, we present a method developed for soft electrochemical etching of fluorine-doped tin oxide-coated glass (FTO-coated glass) that consists of FTO treatment with alternating polarity current in a simple electrolyte. The developed method was found to alter morphology and hydrophilicity of FTO. In order to study the influence of soft electrochemical etching on FTO functionally as a substrate for electrochromic films, a Ni(OH)2-based electrochromic film was deposited onto treated FTO. It was discovered that films deposited onto etched substrate had significantly improved uniformity and higher coloration degree than films deposited on untreated FTO.
31 October 2017 in Eastern-European Journal of Enterprise Technologies
A simple method for determining the oxygen evolution parameters, that uses stepwise potentiostatic regime was proposed. The proposed method was used to study the oxygen evolution on the nickel hydroxide samples that were prepared using different methods and had different grain size. The samples used in the research were studied using Scanning Electron Microscopy, Xray diffraction, IRspectroscopy, and Energy Dispersive Xray analysis. It was demonstrated that the used Ni(OH)2 samples have different morphology, structure and composition. The industrial βNi(OH)2 sample has a shardlike structure, high degree of crystallinity and no intercalated anions. The electrochemically prepared sample has a low degree of crystallinity and has a structure that is composed of α and βforms that contain carbonate and sulfate ions. It had been demonstrated that polarization of oxygen evolution depends on the methods of nickel (II) hydroxide synthesis and its grain size. The effective constants of the Tafel equation had been determined, which for industrial Ni(OH)2 samples are аeff=0.383 beff=0.055 (0–70 µm grain size) and аeff=0.414, beff=0.067 (0–40 µm grain size), for the electrochemically prepared sample – аeff=0.451, beff=0.089 (0–70 µm grain size). It was also demonstrated that polarization of oxygen evolution is affected differently by high current densities for different powders.
1 August 2010 in Surface Engineering and Applied Electrochemistry
The quantitative relation between the resistivity of the solid phase active substance NiOOH/Ni(OH)2 and its bulk resistivity, which can be measured experimentally according to the potential jump when the current is switched on, is established with the simplified mathematical model of a thin porous electrode with a solid phase reagent. The dynamics of the resistivity of the NiOOH/Ni(OH)2 particles in the course of the discharge is ascertained with the help of the proposed method.
17 May 2018 in ECS Journal of Solid State Science and Technology
A simple and sensitive chemosensor for the determination of asymmetric dimethylarginine (ADMA) was fabricated and tested. In this chemosensor, an electrochemically deposited molecularly imprinted polymer film of thiophene-based organic semiconductor served as the recognition unit. Analytical parameters of the chemosensor were tested with use of voltammetric and impedimetric signal transduction. The devised chemosensor responded linearly from 0.3 to 2.2 μM, with LOD of 0.3 or 0.4 μM for DPV and EIS transduction, respectively. Moreover, the chemosensor operated in the presence of excess of interferences. The determined analytical parameters indicated applicability of the chemosensor for determination of ADMA in body fluids.
1 January 2019 in Theoretical and Applied Ecology
The rinsing and waste water of the plating industry, containing the heavy metal cations, are the source of environmental pollution. Nickel cations have a strong biological hazard. At the same time, up to 30% of nickel compounds spent on nickel plating are irretrievably lost to the rinsing water. Purification of the rinsing and wastewater from heavy metal cations is expensive. It's economically effective to develop the methods of local treatment of plating rinsing water with the recovery of the heavy metals in the easy utilizing forms. The hydroxide is the most perspective form for nickel as it has high electrochemical activity and can be used for alkaline secondary cell production. The method of electrochemical synthesis of the nickel hydroxide in the slit diaphragm electrolyzer from the rinsing water of bright nickel plating has been proposed. The treatment of rinsing water of the bright nickel plating for surfactants recovery has been made. The samples of nickel hydroxide obtained from treated and untreated rinsing water, have been studied by XRD, voltammogram and charge-discharge cycling in the secondary cell regime. The comparative analysis shows that even the nickel hydroxide sample obtained from untreated rinsing water can be used as an active substance of the positive electrode of alkaline secondary cells. This sample's specific capacity is 142 mA.h/g with cost of 4 $/kg (in comparison with 182 mA.h/g and 18-22 $/kg for industrial sample). It was detected that the nickel hydroxide sample obtained from the rinsing water of bright nickel plating after purification from surfactant by bubble-film extraction, has the highest parameters. In this case specific capacity is 194 mA.h/g compared 182 mA.h/g for the industrial sample produced by Bochemi. JSC (Czech Republic).