The feasibility of in situextraction and transesterification of spent coffee ground oil into fatty acid methyl esters with supercritical methanol has been investigated in the temperature range 473–603 K, and in the pressure range 10.0–30.0 MPa. At 30.0 MPa and 603 K, a fatty acid methyl esters (FAME) yield of 84.9% was obtained. Carbon dioxide was added to methanol with the aim of reducing the operating temperature and pressure. It was demonstrated that at a reaction temperature of 573 K, pressure of 10.0 MPa and a CO2/MeOH molar ratio of 0.11, a FAME yield of 93.4% was obtained.
Eucalyptus bark contains significant amounts of triterpenoids with demonstrated bioactivity, namely triterpenic acids and their acetyl derivatives (ursolic, betulinic, oleanolic, betulonic, 3-acetylursolic, and 3-acetyloleanolic acids). In this work, the supercritical fluid extraction (SFE) of Eucalyptusglobulus deciduous bark was carried out with pure and modified carbon dioxide to recover this fraction, and the results were compared with those obtained by Soxhlet extraction with dichloromethane. The effects of pressure (100–200 bar), co-solvent (ethanol) content (0, 5 and 8% wt), and multistep operation were studied in order to evaluate the applicability of SFE for their selective and efficient production. The individual extraction curves of the main families of compounds were measured, and the extracts analyzed by GC-MS. Results pointed out the influence of pressure and the important role played by the co-solvent. Ethanol can be used with advantage, since its effect is more important than increasing pressure byseveral tens of bar. At 160 bar and 40 °C, the introduction of 8% (wt) of ethanol greatly improves the yield of triterpenoids more than threefold.
We report for the first time the use of a microfluidic supercritical antisolvent process (μSAS) to synthesize semiconducting polymer nanoparticles (NPs) of poly(3-hexylthiophene) (P3HT).