Double-layered zeolitic imidazolate framework (ZIF) membranes were fabricated inside polyimide P84 hollow fibers by a step-synthesis conducted by microfluidic technology and applied to pre-combustion gas separation. Our hypothesis, based on the information provided by a combination of molecular simulation and experiments, is that a CO2 adsorption reduction on the surface of the ZIF-9 would enhance the molecular sieving effect of this ZIF-9 layer and therefore the selectivity in the H2/CO2 mixture separation of the entire membrane. This reduction would be achieved by means of a less-CO2-adsorptive methylimidazolate-based ZIF-67 or ZIF-8 layer coating the ZIF-9. ZIF-8/ZIF-9 and ZIF-67/ZIF-9 double-layered membranes were prepared and characterized by XRD, FTIR, SEM, FIB, TEM and EDS. This unprecedented strategy led to a H2/CO2 separation selectivity of 9.6 together with a 250 GPU H2 permeance at 150 °C, showing a significant improvement with respect to the pure ZIF-9 membrane. Double-layered membranes also showed higher apparent CO2 activation energies than single-layered membranes, attributable to a diminished adsorption.
16 October 2008 in Physical Chemistry Chemical Physics
We use Monte Carlo simulations to study the adsorption and separation of the natural gas components in IRMOF-1 and Cu-BTC metal–organic frameworks. We computed the adsorption isotherms of pure components, binary, and five-component mixtures analyzing the siting of the molecules in the structure for the different loadings. The bulk compositions studied for the mixtures were 50 : 50 and 90 : 10 for CH4–CO2, 90 : 10 for N2–CO2, and 95 : 2.0 : 1.5 : 1.0 : 0.5 for the CH4–C2H6–N2–CO2–C3H8 mixture. We choose this composition because it is similar to an average sample of natural gas. Our simulations show that CO2 is preferentially adsorbed over propane, ethane, methane and N2 in the complete pressure range under study. Longer alkanes are favored over shorter alkanes and the lowest adsorption corresponds to N2. Though IRMOF-1 has a significantly higher adsorption capacity than Cu-BTC, the adsorption selectivity of CO2 over CH4 and N2 is found to be higher in the latter, proving that the separation efficiency is largely affected by the shape, the atomic composition and the type of linkers of the structure.
24 March 2014 in Physical Chemistry Chemical Physics
We used a combination of experiments and molecular simulations to investigate at the molecular level the effects of zeolite structure on the adsorption and diffusion of sulfur dioxide, carbon dioxide and carbon monoxide as well as separation processes of their mixtures. Our study involved different zeolite topologies and revealed numerous structure–property trends depending on the temperature and pressure conditions. Sulfur dioxide, which has the strongest interactions with zeolites due to its size and polarity, showed the largest adsorption across investigated temperatures and pressures. Our results indicate that structures with channel-type pore topology and low pore volume are the most promising for selective adsorption of sulfur dioxide over carbon dioxide and carbon monoxide under room conditions, while structures with higher pore volume exhibit better storage capacity at higher pressure. Our results emphasize the need for considering both adsorption and diffusion processes in the selection of the optimal structure for a given separation process. Our findings help to identify the best materials for effective separation processes under realistic operating conditions.
18 July 2012 in Industrial & Engineering Chemistry Research
An approach for computing Fick diffusivities directly from equilibrium molecular dynamics (MD) simulations is presented and demonstrated for a ternary chloroform–acetone–methanol liquid mixture. In our approach, Fick diffusivities are calculated from the Maxwell–Stefan (MS) diffusivities and the so-called matrix of thermodynamic factors. MS diffusivities describe the friction between different molecular species and can be directly computed from MD simulations. The thermodynamic factor describes the deviation from ideal mixing behavior and is difficult to extract from both experiments and simulations. Here, we show that the thermodynamic factor in ternary systems can be obtained from density fluctuations in small subsystems embedded in a larger simulation box. Since the computation uses the Kirkwood–Buff coefficients, the present approach provides a general route toward the thermodynamics of the mixture. In experiments, Fick diffusion coefficients are measured, while previously equilibrium molecular dynamics simulation only provided MS transport diffusivities. Our approach provides an efficient and accurate route to predict multicomponent diffusion coefficients in liquids based on a consistent molecular picture and therefore bridges the gap between theory and experiment.