A. D. Kuranov

A. D. Kuranov

Auto-generated profile, based on publicly available information

A. D. Kuranov

St Petersburg Min Univ, St Petersburg, Russia

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 November 2019
Verified
Conference Paper
Open access
PDF file
ASArkadiy Shabarov
Arkadiy Shabarov
AKAnton Kuranov
Anton Kuranov
APAnton Popov
Anton Popov
STSergey Tsirel
Sergey Tsirel
The paper discloses that geological faults and phenomena associated therewith are the main risks of mining. The phenomena of fault activity and specific features of near-fault zones, determining their impact on the stability of mine workings and other man-made objects are discussed in detail. Different sections of faults are classified according to the degree and types of risk. The main attention is paid to the most stressed zones, where the fault is a closely spaced crack in the rock, characterized by specific strength and rock-bump hazard effect. The paper discloses that although mining operations change the stress-strain state of the massif, nonetheless, most of hazardous situations and geodynamic phenomena during excavation occur in tectonically stressed zones that already existed in the massif. In these areas, man-made overload during mining results to the formation of extremely stressed geodynamically hazardous zones. Thus, geodynamic zoning, which includes the identification of faults and block structure, assessment of their activity, as well as reconstruction of the stress-strain state of both the blocks and the near-fault zones, is the key method for assessing risks of geodynamic phenomena.

31 December 2021 in Eurasian Mining
Verified
Journal Article
Closed access
ASA. N. Shabarov
A. N. Shabarov
AKA. D. Kuranov
A. D. Kuranov
VKV. A. Kiselev
V. A. Kiselev
Assessing the zones of geologic features influence is a task of dynamic rock pressure manifestation prediction. Under rock pressure manifestations this paper understands rock bursts and micro rock bursts, namely, the coordinates of the recorded damage centers in mine workings and pillars the moment a rock burst or a micro rock burst was recorded. The paper determines the distances from the recorded dynamic rock pressure manifestation points in mine workings to tectonic faults in the rock mass of the Kukisvumchorr apatite-nepheline ore field on the Kola Peninsula. The methods of statistical analysis for the distance value frequency uniformity were used for data processing.

8 November 2019
Verified
Conference Paper
Open access
PDF file
Konstantin MorozovKonstantin Morozov
Konstantin Morozov
ASArkady Shabarov
Arkady Shabarov
AKAnton Kuranov
Anton Kuranov
Nikita BelyakovNikita Belyakov
Nikita Belyakov
BZBoris Zuyev
Boris Zuyev
EBEugene Bakhtin
Eugene Bakhtin
The paper describes the fundamental issues of deformation monitoring systems and instrumental methods for measuring the stress-strain state of the rock massif based on the use of three-component strain sensors developed by specialists from the University of Mines and Avangard OJSC. One of the main tasks of the developed systems is the prediction and prevention of possible dynamic manifestations of rock pressure in rockburst-hazardous deposits.

29 January 2020 in Gornyi Zhurnal
Verified
Journal Article
Closed access
AKA. D. Kuranov
A. D. Kuranov
IBI. I. Bagautdinov
I. I. Bagautdinov
DKD. A. Kotikov
D. A. Kotikov
BZB. Yu. Zuev
B. Yu. Zuev
The Yakovlevo deposit of rich iron ore is located in the Belgorod Region. The deposit is composed of two genetic ore types—rich iron in residual soil of ferruginous quartzite and sedimentary ore. The rich ore occurrence depth is 440–550 m. The thick sedimentary formation contains 5 aquifers. The sedimentary roof is loose and unstable rocks. One of the major engineering problems in the mine is prediction of the safety pillar subsidence in the course of stoping. The pillar is the impervious stratum and protects the mine from excess ingress of groundwater. Over the period from the observation beginning and up to 2016, the pillar subsidence amounted to round 1470 mm. The ground surface subsidence was not less than 900 mm. The procedure developed for the subsidence prediction in the safety pillar consisted of three independent stages of laboratory and in situ research. In the first stage, the comprehensive finite-element model of the Yakovlevo Mine was prepared. Subsidences were calculated by the finite element method in the licensed software package RS2 of Rocscience. The comparative analysis of the calculated and in situ measured data showed their acceptable agreement. The numerical model parameters were verified. In the second stage, the physical modeling of all strata and their movement was carried out with equivalent materials. The modeling procedure was based on solution of problems on rock mass movement using two different-scale models. From the modeling results, it is found that the extreme subsidence of the safety pillar in sequential toping makes 3.17 m. In this case, the flexure of the lower boundary of the water-tight stratum is within the critical values. The results were confirmed by the analysis of photographic material showing no visible (water-conducting) fractures. Based on the numerical calculations, physical modeling with equivalent materials and the in situ data analysis, the prediction of the safety pillar subsidence was carried out for stoping operations down to –425 m. During extraction of bottom layers (from –410 to –425 m), the flexure and deformation in the water-tight stratum roof reach critical values.

1 March 2021 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
VKV Kiselev
V Kiselev
NGN Guseva
N Guseva
AKA Kuranov
A Kuranov
Subject matter of the research is mining and geological subsurface objects use in the conditions of the DGDE possibility. Scope of research is the regularities of spatial distribution of geological objects properties, causing DGDE in the mining enterprise. The purpose of research is to map the mining enterprise territory subject to DGDE using the method of objective determination of weight coefficients and influencing factors. The main tasks: establish the size of the operational territorial units (OTU) and discretization of the research area; determination of the weight coefficients of the factors influencing the process of the DGDE occurrence formation on the subsurface territory; create a mathematical expression for a generalizing value determining that characterizes the degree of adverse factors coincidence, and therefore the risk rank of the DGDE occurrence.

29 November 2019 in Gornyi Zhurnal
Verified
Journal Article
Closed access
VBV. V. Balandin
V. V. Balandin
VLV. L. Leonov
V. L. Leonov
AKA. D. Kuranov
A. D. Kuranov
IBI. I. Bagautdinov
I. I. Bagautdinov
Selection and design of safe and efficient support systems for mines is a critical problem at the Oktyabrsky copper–nickel deposit. The deposit is composed of strong and hard rocks. The uniaxial compression strength of high-grade and disseminated ore is 70–120 and 95–150 MPa, respectively. The stress state is mostly gravitational. As per Russian regulatory documents (SP 91.13330.2012), parameters of horizontal and inclined underground excavations are calculated based on the estimated anticipated displacements in rock mass. This approach is inefficient in the geological conditions of the Oktyabrsky deposit. There are two approaches to the support system design. The conventional approach considers the support system as an engineering structure subjected to external loads. The other approach is based on the concept on interaction of the support and rock mass as a single deformable system. The Saint-Petersburg Mining University assumed the research object to be development headings and permanent openings with estimated span of 6 m and area not more than 25 m2, at the depth to 900 m. First, the rock mass quality was assessed using the Q-index by Barton. The support system design was determined by the Q support chart from Grimstad and Barton. The analysis shows that the Grimstad–Barton recommendations on the support system design can be restrictedly applied in the geological conditions of the Oktyabrsky deposit and need refinement. For this reason, additional calculations were performed for the specific conditions. The numerical modeling determined the possible fall zone parameters using the generalized Hoek–Brown criterion. It is assumed that the possible failure zone dimensions are not higher than the sizes of inelastic strain zones in sidewalls and roof of the mine workings. The determined dimension of the possible roof fall zone and the value of loads applied to support are the required parameters for any support system design for underground mines. Thus, in the article, the support system design is implemented for rock mass areas with the known rock quality by the Q-index. The scope of the support system design embraces the reinforced c concrete and reinforced polymer rock bolting, composite support composed of rock bolts and mesh reinforcement, shotcrete and arch-wise yielding support systems.The authors appreciate participation of V. P. Marysyuk, Yu. N. Nagovitsyn and M. P. Sergunin in the study.