21 October 2020 in IEEE Access
This article presents a new application field of a giant magneto-impedance (GMI) sensor. It shows valuable findings for the GMI sensor on the possibility of a new receiving element in magnetic field communication. The proposed GMI sensors serve as antennas and mixers in receiver systems. They have the advantage of being easily implemented and in terms of mass production and manufacturing processes due to the manufacture base on a printed circuit board (PCB). Their smaller size, lower cost, and higher sensitivity have more advantages than conventional magnetic sensors, such as the magneto-inductive, anisotropic magneto-resistive, and giant magneto-resistive sensors. Two types of PCB-based GMI sensors are proposed. The first type of GMI sensor is directly wound around the solenoid-shaped pickup coil onto an alumina insulation tube inserted with an amorphous microwire. The second type of GMI sensor has a patterned pickup coil that does not require the winding of the coil, similar to the patterned pickup coil of a micro electro-mechanical system-based GMI sensor. This GMI sensor provides a new geometry that can be easily manufactured with two PCB substrates. The proposed GMI sensors achieve the equivalent magnetic noise spectral density to the high-sensitivity characteristics of the pT/ $\surd $ Hz level. The equivalent magnetic noise spectral density of 1.5 pT/ $\surd $ Hz at 20.03 MHz is obtained for the first type of GMI sensor, and 3 pT/ $\surd $ Hz at 3.03 MHz is achieved the second type. The analyzed results of the bandwidth and the channel capacity for the two types of GMI sensors are acceptable. This first analysis confirms the possibility of the implementation of GMI sensors in magnetic field communication. The results of this experiment confirm the high performance of the proposed GMI sensors and their applicability in magnetic field communication. The detailed experimental results of the proposed GMI sensors are presented and discussed.
13 October 2022 in IEEE Access
This paper presents the topology of a novel approach to magnetic communication using a differential magnetic induction (MI)-based receiver and a differential MI receiving sensor. In this paper, a differential MI sensor based on two ferromagnetic cores is proposed as a receiving sensor, unlike the air coil-type MI sensor in the conventional search coil sensor concept. This differential MI sensor has the advantages of ultra-high sensitivity characteristics of the pT/ $\surd $ Hz level, which can detect weak magnetic fields in magnetic communication; moreover, the sensor is smaller than a conventional air coil MI sensor. The proposed differential MI sensor contributes to improving sensor performance by increasing its signal-to-noise ratio. The design and fabrication of the proposed MI sensor were based on a printed circuit board (PCB). The pickup coil of the PCB-based MI sensor directly wound the pickup coil onto a ferromagnetic core composed of Ni-Zn ferrite material. To analyze the key factors that affected the performance of the receiver, the magnetic field-to-voltage conversion ratio (MVCR) and equivalent magnetic spectral density measurements of the proposed PCB-based MI sensor were performed. Wireless digital communication using quadrature phase shift keying (QPSK), which is less sensitive to noise and has a high data rate, was used to evaluate the proposed MI-based receiver. The transmitted and received waveforms were compared to confirm that the transmitted digital data were accurately received as a result of the final demodulation of the receiver. Additionally, several performance metrics, such as constellation and error vector magnitude, were measured. The results of the comprehensive analysis confirmed the applicability of the proposed differential MI-based receiver to a magnetic field.
21 April 2022 in IEEE Access
In this paper, a deformed radiating element is proposed to design a comb-line array antenna for low sidelobe levels in the millimeter-wave band. To design the comb-line array antenna with a low sidelobe level, the use of the wide radiating elements for a relatively large radiation conductance is required. However, the conventional rectangular radiating element has transverse current flows on it, resulting in undesirable transverse radiation conductance for cross-polarization. On the contrary, in the proposed radiating element, which is implemented by cutting obliquely the connection part to the feeding line from a rectangular element, the radiations from the transverse currents cancel each other, and low radiation conductance for cross-polarization and dominant radiation conductance for co-polarization are achieved. A 17-element linear comb-line array antenna with the sidelobe below −20 dB is designed and measured at 79 GHz. Using the proposed radiating elements, we obtained the sidelobe level of −21.9 dB in the array, but the array using the conventional radiating elements shows the sidelobe level of −16.9 dB. This letter demonstrates the availability of the proposed element for the easy and accurate design of the comb-line array antenna with the low sidelobe level.
1 July 2014 in Electronics Letters
A sensing probe for medical imaging diagnostic systems is presented. The proposed probe consists of a double‐ridged waveguide (DRWG) filled with dielectric ceramic and an aperture with a tapered ridge. The DRWG is used to suppress higher‐order mode radiations in the rectangular waveguide. The proposed probe is designed for broadband sensing in an immersion liquid with a complex dielectric constant. The performance of the fabricated probe successfully covers the frequency band of 3–6 GHz. The probe suppresses higher‐order modes and provides symmetric and similar radiation patterns within the operating frequency range.
2 May 2022 in IEEE Access
Given the interest of researchers for wireless communications in electromagnetic (EM) shadow areas, a magnetic field communication has emerged to overcome RF challenges based on magnetic permeability characteristics. However, magnetic field communication has the demerit of a short communication range. Considering this limitation, we have proposed the GMI sensor-based field receiver to obtain immunity to low-frequency noise and high sensitivity for extension of communication range in previous studies. Further, this paper designs a magnetic field communication system with a GMI sensor-based receiver including a transmitter. Even though the basic concept of magnetic field communication is taken from previous studies, this study conducts the different realization of the system with transmitter system and communication link. Besides, this paper proposes the experiment of magnetic field communication using a GMI sensor-based system to verify its applicability in the practical environment for the first time. Bit error rate (BER), spurious-free dynamic range (SFDR), and random noise are measured with an on-off keying (OOK) communication link to analyze the stability and reliability of the system. The experimental verification and analysis entail the conditions of communication distance and channel medium to mimic practical communication in atmospheric, underwater, and underground environments. A comprehensive analysis of the system design and experimental verification for application in a practical environment show the possibility of the proposed system to realize improved wireless communications in EM shadow areas.
3 June 2021 in IEEE Access
Radio reception relies on the medium which determines the propagation characteristics of the electromagnetic fields carrying the information. The permittivity varies greatly depending on the medium, but it remains nearly constant, except when magnetic materials are used. For this reason, magnetic fields, typically affected by permeability, can be utilized in microwave challenging environments. In this paper, a new approach based on the giant magnetoimpedance (GMI) effect is presented. The proposed GMI-based receiver has an effective double-superheterodyne topology, where “effective” means that the receiver actually has a single mixer but appears to have added a virtual mixer due to the GMI effect. The magnetic field-to-voltage conversion ratio (MVCR), the spurious free dynamic range (SFDR) and the receiver sensitivity are characterized, and from these results the optimal operating conditions of the fabricated receiver are obtained. Additionally, wireless digital communication using on-off keying (OOK) is demonstrated and transmitted and received waveforms are compared, with the final demodulation result of the receiver showing that the transmitted digital data are precisely extracted.