1 September 2019 in Advanced Powder Technology
2 September 2024 in Chemical Engineering Journal
15 October 2018 in ACS Omega
It is very important to improve the cyclone separator separation efficiency for fine particles. On the basis of the Reynolds stress model (RSM), a new two-stage cyclone separation device is modeled and the model is simulated under six kinds of air volumetric flow rate conditions. The two-stage cyclone separator was then tested in the laboratory and the experimental data were compared with the simulation data. The results show that the RSM model can predict the performance of the two-stage cyclone separation device with high accuracy. Increasing of the air volumetric flow rate can not only improve the separation efficiency of the two-stage cyclone separator, but also effectively change the classification range. Because of the centrifugal force, even if the pressure drop is low, the 1st-cyclone can completely separate particles above 5.0 μm. When the air volumetric flow rate is more than 290 m3/h, the 2nd-cyclone can effectively separate the particles below 2.0 μm. The study also confirmed the nonlinear relationship between the pressure drop and the cut-off particle size and the maximum particle size. When the pressure drop exceeds a certain value, there is no longer any effect on the cut-off particle size and the maximum particle size.
1 May 2020 in Journal of Cleaner Production
7 August 2019 in ACS Omega
As a widely used separation device, a cyclone separator is especially important to improve its separation efficiency. In this paper, a new two-stage cyclone separator is designed and modeled by the Reynolds stress model. Under the premise of determining the diameter of the second-stage cyclone (D), the effects of five first-stage cyclone diameters (Du) on the performance of the two-stage cyclone are simulated. The performance of the single-stage cyclone separator is also obtained. The results show that Du has significant effects on the internal pressure field, flow field, and vortex core of the two-stage cyclone. Compared with the single-stage cyclone separator, the separation efficiency of the two-stage cyclone separator is significantly improved. When Du = 6D, the separation efficiency is improved by 15.5% compared with that of the single-stage cyclone. In addition, the two-stage cyclone separator can effectively reduce the Euler number.
9 September 2023 in Process Safety and Environmental Protection