25 January 2013 in Plasma Physics Reports
Results of studies on fast ignition of inertial confinement fusion (ICF) targets are reviewed. The aspects of the fast ignition concept, which consists in the separation of the processes of target ignition and compression due to the synchronized action of different energy drivers, are considered. Criteria for the compression ratio and heating rate of a fast ignition target, the energy balance, and the thermonuclear gain are discussed. The results of experimental and theoretical studies of the heating of a compressed target by various types of igniting drivers, namely, beams of fast electrons and light ions produced under the action of a petawatt laser pulse on the target, a heavy-ion beam generated in the accelerator, an X-ray pulse, and a hydrodynamic flow of laser-accelerated matter, are analyzed. Requirements to the igniting-driver parameters that depend on the fast ignition criteria under the conditions of specific target heating mechanisms, as well as possibilities of practical implementation of these requirements, are discussed. The experimental programs of various laboratories and the prospects of practical implementation of fast ignition of ICF targets are reviewed. To date, fast ignition is the most promising method for decreasing the ignition energy and increasing the thermonuclear gain of an ICF plasma. A large number of publications have been devoted to investigations of this method and adjacent problems of the physics of igniting drivers and their interaction with plasma. This review presents results of only some of these studies that, in the author’s opinion, allow one to discuss in detail the main physical aspects of the fast ignition concept and understand the current state and prospects of studies in this direction.
1 October 2015 in Journal of Experimental and Theoretical Physics
18 December 2018 in Nuclear Fusion
1 October 2015 in Physics of Plasmas
The first space-time resolved spontaneous magnetic field (SMF) measurements realized on Prague Asterix Laser System are presented. The SMF was generated as a result of single laser beam (1.315 μm) interaction with massive planar targets made of materials with various atomic numbers (plastic and Cu). Measured SMF confirmed azimuthal geometry and their maximum amplitude reached the value of 10 MG at the laser energy of 250 J for both target materials. It was demonstrated that spatial distributions of these fields are associated with the character of the ablative plasma expansion which clearly depends on the target material. To measure the SMF, the Faraday effect was employed causing rotation of the vector of polarization of the linearly polarized diagnostic beam. The rotation angle was determined together with the phase shift using a novel design of a two-channel polaro-interferometer. To obtain sufficiently high temporal resolution, the polaro-interferometer was irradiated by Ti:Sa laser pulse with the wavelength of 808 nm and the pulse duration of 40 fs. The results of measurements were compared with theoretical analysis.
7 June 2005 in Laser and Particle Beams
The requirements of matching shell ICF target parameters, parameters of compressing, and triggering drivers under direct (fast) ignition are developed. Thin shell target, which represents a shell-ablator with a DT-ice layer, frosted on the inner surface of the shell are considered. Design of a target which ensures the energy supply from the triggering driver to the central part of thermonuclear fuel, in both spherical and cylindrical geometry is developed. Spherical target is furnished with one or two conical channels for the injection of the triggering driver radiation. The ends of the cylindrical target are protected by heavy material walls that have the holes of the radius equal to the final radius of compressed fuel. It was found that the parameters of fast ignition spherical and cylindrical targets, which provide high thermonuclear gain of 500–2000 in the range of the compressing driver energy of 1–10 MJ, may be matched with the drivers parameters at low aspect ratios of the targets, 10–20. The operation of spherical targets at the moderate radius convergence ratio of 15–20, may be provided at the triggering driver energy not higher than 30 kJ. The operation of cylindrical target with spin-oriented DT-fuel at radius convergence ratio of 20–25 may be provided at 150–200 kJ of the triggering driver energy.
1 October 2017 in Physics of Plasmas
The problem of spontaneous magnetic field generation with nanosecond laser pulses raises a series of fundamental questions, including the intrinsic magnetization mechanisms in laser-driven plasmas and the understanding of charge-discharge processes in the irradiated target. These two issues are tightly bound as the charge-discharge processes are defined by the currents, which have in turn a feedback by magnetic fields in the plasma. Using direct polaro-interferometric measurements and theoretical analysis, we show that at parameters related to the PALS laser system ( m, ps, and W/cm2), fast electrons play a decisive role in the generation of magnetic fields in the laser-driven plasma. Spatial distributions of electric currents were calculated from the measured magnetic field and plasma density distributions. The obtained results revealed the characteristics of strong currents observed in capacitor-coil magnetic generation schemes and open a new approach to fundamental studies related to magnetized plasmas.