Till nowadays, the Controller Area Network (CAN) has been a de facto standard for communication in automotive applications. To meet the requirements of new high-end vehicular systems, new communication protocols such as the FlexRay Communication System and the CAN with Flexible Data-rate (CAN-FD) has been developed. In the near future, it is expected the coexistence of those protocols in the same vehicle, with electronic control units (ECUs) connected to different network buses exchanging information through gateways. In this paper we investigate the following problem: “how to schedule the communication in a vehicular system, considering that a message is transmitted through a network that is composed of CAN-FD, FlexRay and CAN segments interconnected by gateways.” We propose a method for the schedulability analysis of such systems, focusing on the case where a message is generated in a ECU connected to a CAN-FD segment is used by an ECU connected to a CAN bus.
Embedded consumer electronics like video processing systems require large storage capacity and high bandwidth memory access. Also, those systems are built from heterogeneous processing units, designed specifically to perform dedicated tasks in order to maximize the processing power. A single off-chip memory is shared between the processing units to reduce power and save costs. The external memory access is the system bottleneck when decoding high definition video sequences in real time. This paper presents the design and validation of a multichannel DDR2 SDRAM controller design for a H.264/AVC video decoder. A four-level memory hierarchy was designed to manage the decoded video in macroblock granularity with low latency. The proposed controller is able to manage memory access in decoding 1080p H.264 video sequences. This architecture was validated and prototyped using a Xilinx Virtex-5 FPGA board.
Multimedia applications are known to use large amounts of memory. The video modules need also high throughput memory port for coding and decoding high resolution video sequences. The design of a multimedia System-on-Chip (SoC) could implement embedded block RAMs but it is much more cost-effective to use a single external memory at the expense of a multichannel memory controller. This paper presents the design and implementation of an efficient memory hierarchy for a Set-Top Box (STB) SoC with a video decoder. To use efficiently the Double Data Rate (DDR) external memory it must be accessed in burst mode whenever possible. In this paper we develop an analysis and implementation of a four level memory hierarchy targeting data latency reduction and bandwidth optimization of the memory port. The case study is DDR2 SDRAM memory used as the main system video memory in a digital television set-top box implemented on a Virtex-5 FPGA. This paper presents the architecture of the system and shows that the memory hierarchy efficiently uses the DDR characteristics while serving four client processes. The proposed memory architecture can reduce data latency in 78% when compared to a direct demand-access procedure.
9 January 2013 in International Journal of Reconfigurable Computing
This work presents the integration of several IPs to generate a system-on-chip (SoC) for digital television set-top box compliant to the SBTVD standard. Embedded consumer electronics for multimedia applications like video processing systems require large storage capacity and high bandwidth memory. Also, those systems are built from heterogeneous processing units, designed to perform specific tasks in order to maximize the overall system efficiency. A single off-chip memory is generally shared between the processing units to reduce power and save costs. The external memory access is one bottleneck when decoding high-definition video sequences in real time. In this work, a four-level memory hierarchy was designed to manage the decoded video in macroblock granularity with low latency. The use of the memory hierarchy in the system design is challenging because it impacts the system integration process and IP reuse in a collaborative design team. Practical strategies used to solve integration problems are discussed in this text. The SoC architecture was validated and is being progressively prototyped using a Xilinx Virtex-5 FPGA board.
Embedded consumer electronics like video processing systems require large storage capacity and high bandwidth memory access. Also, those systems are built from heterogeneous processing units, designed specifically to perform dedicated tasks in order to maximize the processing efficiency. A single off-chip memory is shared between the processing units to reduce power and save costs. The external memory access is the system bottleneck when decoding high definition video sequences in real time. A four level memory hierarchy was designed to manage the decoded video in macroblock granularity with low latency. The inclusion of the memory hierarchy in the system has also implications on system integration and IP reuse in a collaborative design. This work presents some issues in the integration of the memory hierarchy on the system and practical strategies used to solve them. This architecture was validated and is being progressively prototyped using a Xilinx Virtex-5 FPGA board.