25 November 2024 in IEEE Robotics and Automation Letters
Due to the high redundant degree of freedom characteristics of snake robots, their joint lever arms tend to be very long and often result in torque saturation, especially in the case of inter-tree motion. Traditional static planning methods based on curve segments connecting or wave functions are often limited by torque saturation and cannot meet the requirements of inter-tree motion of snake robots. Therefore, in this letter, a delay-aware swing and grasp framework combining rules and learning methods (DSG) is proposed for extending the inter-tree motion capability of snake robots. Specifically, first, to overcome the torque saturation problem, a joint torque direction determination rule is proposed to fully utilize the kinetic energy of the snake robot and enable the robot to move in the desired manner. Then, the DSG reduces the exploration space of the policy and guarantees the performance under delay, and based on which a maneuverable winding gait is designed to enable it to wrap around the target horizontal branch with maneuverability. Simulation and sufficient experiment results demonstrate that the proposed reinforcement learning (RL) controller has low torque requirement, high robustness under high delay, fast motion speed, and high generalizability.
16 January 2026 in IEEE Transactions on Industrial Electronics
Head stabilization is crucial for 3-D snake robots to perceive their environment effectively using onboard vision sensors. This article proposes a head-orientation-stabilized gait that enables the snake robot to capture wide-field video with improved stability. Given the challenge of compensating for coupled swings in both directions, the snake robot is divided into a motion part and a head-raising part, as guided by the proposed design rules. The motion section suppresses body-induced disturbances while preserving off-road locomotion capability and the head-raising section uses a hook shape to broaden the camera view and reduce residual disturbances. To generate the motion part, the S-pedal gait, suited for uneven terrain, is reformulated into Frenet–Serret-based angle functions for localized body tuning without full-shape transmission. Furthermore, setting specific rolling angles leverages segment twist angles to decouple 3-D shape formation, where pitch and yaw joints generate floating and grounding arcs, respectively, enabling independent joint modulation and enhanced swing suppression. A series of experiments validates the proposed gait, with results showing satisfactory head stabilization, wider camera coverage, and improved adaptability to challenging terrain compared to existing methods.
13 March 2026 in IEEE Robotics and Automation Letters
This letter presents a two-dimensional planar path-following controller for active-joint active-wheel snake-like robots. Compared to passive-wheel snake robots, active-wheel snake robots can navigate narrower spaces and generate stronger driving forces, enabling adaptation to various terrains. However, due to the highly redundant multi-link and multi-active-wheel body configuration, achieving whole-body path following for active-joint active-wheel snake robots is challenging. To address this, we propose a head-body stepwise path-following control method based on a multi-rigid-body kinematic model to solve the problem of high degrees of freedom and the coordination between joints and wheels. First, by applying the no-side-slip constraint, we construct a multi-joint and multi-wheel kinematic model for the snake body path-following control task. Then, a motion controller is designed for the fundamental motion of the active wheeled snake robot. To achieve path following, an arbitrary path following controller is designed for turning angle. Then, the designed turning angle is substituted into the motion controller, and the angular velocity of each joint is calculated based on kinematic model. Subsequently, an incremental PID controller is designed to control the angle of each joint. Finally, the whole-body path following task of active-wheel snake-like robot can be implemented. Simulation and extensive experimental results for both curvature-continuous and curvature-discontinuous paths demonstrate the superior following performance of the proposed controller compared to the PD method and passive-joint conditions. Furthermore, the robustness of the proposed method to variations in friction is validated.